(Close)
Forgot password?
Join Now! Watch Tutorials
macProVideo.com
Close

मुफ्त प्रीमियम प्रवेश

हमारे प्रीमियम हब लेख, परियोजना फ़ाइलें और से प्रत्येक ट्यूटोरियल वीडियो के पहले 10% के पूरे पुस्तकालय प्रवेश ऑनलाइन ट्यूटोरियल पुस्तकालय .

अपने मुफ़्त खाता बनाएँ!

Already a member? Login

Categories

Related Articles

  • Recording MIDI in Logic Pro's Cycle Mode
  • by Darren Burgos
  • There's hope if your keyboard skills can't keep pace with your musical ideas! Darren Burgos explores how recording MIDI in Logic Pro's cycle mode can alleviate stress and make you more creative.
  • Logic Pro's Balancing Act
  • by Peter Schwartz
  • Panpots in Logic don't behave the same for mono and stereo channel strips. Peter Schwartz gets to the heart of the mix in Logic Pro and demystifies pan and balance in this excellent article.
  • Setting Up Logic for Scoring to Video
  • by David Earl
  • Never used Logic for scoring to video, or have found your projects grinding to halt? This article by experienced composer, David Earl, explains how to set up all the basics and optimize performance!
  • Using Ringshifter For Pitch Effects in Logic Pro
  • by Toby Pitman
  • Check out this excellent tip on how to use Logic Pro's Ringshifter plug-in to create a variety of guitar effects like the Boss Octaver and the Octafuzz. Toby Pitman gets creative.
  • Logic Pro: Get Creative with Region Parameters
  • by Darren Burgos
  • Once you've recorded MIDI notes into Logic Pro there's a host of ways to alter the performance. Darren Burgos examines how to make use of the Region parameters area. + download Logic Project.

Related Tutorial-Videos

  • Logic 409
  • Dubstep Essentials
  • MPV trainer Nigel Broad is back with another great electronic dance music exploration, Dubstep Essentials . Join Nigel in this 25-video collection as he takes you under his wing and creates a full-blown Dubstep track from Drum and Bass to final mix…
  • Logic 209
  • EVD6 and EFM1: User Guide
  • The EFM1 and the EVD6 are two of the coolest Software Instruments in the Logic collection. Get beyond the presets in this awesome 2-for-1 tutorial by Logic master and SFLogicNinja David Earl...
  • Logic 210
  • Vocoding With EVOC
  • Logic’s EVOC 20 PolySynth is one of the coolest Software Instruments in Logic's EV series of vintage synths. Let David Earl (a.k.a. SFLogicNinja) show you how he uses it and why you need to master this awesome, sonically rich plugin...
  • Logic 208
  • Exploring the EVP88 and the EVB3
  • In this exclusive, full length, “made-for-macProVideo” tutorial by sflogicninja David Earl, you’ll uncover the inner workings of Logic’s physically modeled soft synths: the EVP88 and EVB3. Learn how, with a little tweaking, these synths will rock your productions...
  • Logic 407
  • Producing With Folders
  • Did you know that you can record into Logic’s folders, edit with folders, mix with folders and even rearrange your tune with folders? You can! ... and David Earl (a.k.a. sflogicninja) shows you all of this and more in his maiden tutorial for macProVideo.com!
  • Logic 207
  • Logic's Latency Toolbox
  • Timing Is Everything! In this amazing tutorial Tom Rice shows you the secret to making your tracks “dead-on-the-beat” accurate with absolutely zero latency!
  • Logic 402
  • Logic's Guitar Recording Toolbox
  • A message from Steve H: “This tutorial is one of our finest Logic tutorials ever! With the addition of the Pedalboard and Amp Designer plugins, Logic’s virtual guitar arsenal is capable of overheating transistors, blowing out tubes and stomping out the most awesomely realistic or warped 6 string soundscapes anywhere! I’ve already started using many of these awesome techniques in my tracks and now you can too!”
  • Logic 203
  • Logic's Music-for-Picture Toolbox
  • Learn essential skills for scoring video and film in this comprehensive tutorial by Steve H, a man with over 20 years of experience in making music for moving pictures.
  • Logic 107
  • 64-Bit Logic Unleashed
  • Learn what the new 64-bit Logic Pro means to you by watching this FREE mini-tutorial!
  • Logic 406
  • Olav's Electronica Workflow Tricks
  • Legendary House Producer Olav Basoski is back with a new tutorial that provides a grab-bag of his favourite Logic production tips & tricks.
  • Logic 201
  • Steve H's Logic Master Class #1
  • Learn advanced Logic Pro techniques including Beat Mapping, Groove Templates, Markers, Delay Compensation and more with Steve H!
  • Logic 403
  • Mixing R&B
  • A legend of Motown & the R&B music scene, David Isaac teaches you Deep Mixing Skills ...
  • Logic 303
  • Logic TNT 2 Tips and Tricks
  • Learn incredible Tips 'N Tricks (TNTs) that will make your work with Logic Studio, faster, more fun, and more exciting ...
  • Jul 28, 2010
भाग 2: पूरा शुरुआती गाइड एप्पल तर्क 9 के लिए
  • भाग 2: पूरा शुरुआती गाइड एप्पल तर्क 9 के लिए

  • Genre: Audio
  • Level: Beginner
  • Time to Complete: 15-30 minutes
  • 7 comments — Join Discussion
Google अनुवाद के द्वारा अनुवादित

Preview these Logic Pro Tutorial-Videos

Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video
Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video
Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video

ऑडियो रिकॉर्डिंग. चाहे आप एक अनुभवी गिटारवादक, एक शौक गायक या एक इलेक्ट्रॉनिक संगीतकार भी हैं, तो कुछ स्तर पर आप तर्क में ऑडियो रिकॉर्ड करना चाहता हूँ. - स्थापना और तर्क में ऑडियो रिकॉर्डिंग की मूल बातें पता लगाने है कि वास्तव में हम क्या करने जा रहे हैं इस श्रृंखला के दूसरे भाग में. इससे पहले कि हम शुरू हो, मैं बाहर की जाँच की सिफारिश था इस पूरा शुरुआती तर्क करने के लिए यहाँ गाइड में पहले .

8 या 9 तर्क में रिकॉर्डिंग ऑडियो तेज और पिछले संस्करणों की तुलना में आसान है. अगर आप एक बाह्य ऑडियो इंटरफ़ेस (एक कारण Apogee के तरह नहीं है टी उदाहरण के लिए) अपने मैक से जुड़े हैं, तो आप उपयोग कर सकते हैं निर्मित में या कनेक्शन लाइन में निर्मित Mic . इस पोस्ट के लिए मैं अपने भरोसेमंद युगल का उपयोग कर सकता हूँ, लेकिन हम भी कैसे आप डिवाइस है जो तर्क से ऑडियो रिकार्ड होगा चुन सकते हैं पर एक नज़र ले जाऊँगा.


चरण 1

मैं मान लेंगे कि आप पहले से ही पढ़ा है इस श्रृंखला का पहला भाग और समझने की क्या एक टेम्पलेट और एक ट्रैक है.

यदि आप एक बाह्य ऑडियो इंटरफ़ेस का उपयोग कर रहे हैं पहले कदम के लिए अपने एमएसीएस Firewire या यूएसबी पोर्ट में प्लग है.

अब तर्क शुरू करने और एक खाली परियोजना चुन.


चरण 2

नई पटरियों वार्ता से निम्न का चयन करें:

- 1 ऑडियो ट्रैक

- प्रारूप: मोनो (जब आप एक या एक गिटार है कि एक मोनो इनपुट की तरह लाइन इनपुट माइक्रोफोन से रिकॉर्ड ). यह काफी सामान्य है के लिए vocals, गिटार, रिकॉर्ड, आदि एक माइक्रोफोन का उपयोग.

1 - इनपुट (या इनपुट जो भी आप अपने ऑडियो अंतरफलक पर से रिकॉर्ड करना चाहते हैं मेरे मामले में मैं एक माइक्रोफोन है मेरे युगल पर इनपुट 1 में plugged .). आप इन सेटिंग्स को बाद में बदल सकते हैं.

- आउटपुट: डिफ़ॉल्ट तर्क संकेत उत्पादन करके अपने चयनित ऑडियो अंतरफलक के स्टीरियो उत्पादन के माध्यम से पारित होगा. मैं 1-2 आउटपुट में मेरा छोड़ रहा हूँ.

जब आप कर रहे हैं, बनाएँ क्लिक करें.


चरण 3

We need to check that Logic is setup to use your audio interface as the audio input.
Choose Logic Pro > Preferences > Audio...

डिवाइसेज और कोर ऑडियो टैब के तहत यह सुनिश्चित करें कि सक्षम ticked है बनाते हैं . यदि कोर ऑडियो अक्षम है आप तर्क की कोई आवाज बाहर मिलेगा.

अगला आप तर्क के लिए इनपुट और आउटपुट डिवाइस सेट कर सकते हैं.

(If you are a Logic 8 user you'll be restricted to setting the Device which will use the input and output from the same device only. Pop by the Logic forums for advice on how to have Logic 8 recognize different ins and outs).

मैं स्थापित कर रहा हूँ मेरे युगल के रूप में अपने इनपुट डिवाइस है, और के रूप में मुझे मिल गया है अपने headphones मेरे युगल के हेड फोन्स जैक में plugged, मैं अपने उत्पादन के रूप में युगल भी चुन लेंगे.


चरण 4

मैं जब को यकीन है कि 24 बिट रिकॉर्डिंग हमेशा की जाँच की है ऑडियो रिकॉर्डिंग की सिफारिश करेंगे. यदि इसे छोड़ दिया है अनियंत्रित तर्क 16 बिट ऑडियो रिकॉर्ड है जो आप एक कम गतिशील रेंज देंगे. मैं अंतरिक्ष यहाँ बिट गहराई और नमूना दर के बारे में और अधिक स्पष्ट नहीं है, ऐसा करने के बाहर 101 तर्क की जाँच करें और तर्क 401 प्रदान करता है एक तारकीय और बिट गहराई और नमूना दर के भी करीब के रूप में कैसे एक मास्टर के रूप में अच्छी तरह से परीक्षा तर्क में परियोजना.

पर सॉफ्टवेयर की निगरानी टर्निंग आप किसी भी डालने प्रभाव आप रिकॉर्डिंग के दौरान आपके ऑडियो ट्रैक पर जगह सुनने के लिए सक्षम हो जाएगा.

यदि आप किसी भी परिवर्तन परिवर्तन लागू करें और वरीयताएँ विंडो बंद करें क्लिक करें.


चरण 5

समय शुरू रिकॉर्डिंग करने के लिए! लेकिन इससे पहले कि हम आगे बढ़ें यह महत्वपूर्ण है करने के लिए अपने मौजूदा परियोजना को बचाने. यह यह एक बहुत आसान दर्ज की ऑडियो फ़ाइलों के लिए जगह है जहाँ तर्क के लिए पता करने के लिए कर देगा.

फ़ाइल चुनें

एक फ़ोल्डर चुनें और परियोजना एक नाम दे. तर्क तो है कि नाम और है कि नए फ़ोल्डर के अंदर एक परियोजना फ़ाइल के साथ एक नया फ़ोल्डर बना जाएगा. मैं वास्तव में सुझाव है कि आप टिकटिक शामिल आस्तियों के रूप में इस चेक बॉक्स आप क्या संपत्ति या फ़ाइलें और सेटिंग्स परियोजना फ़ोल्डर में सहेजा जाएगा पर आगे विकल्प दे देंगे.

सहेजें जब आप कर रहे हैं क्लिक करें.


चरण 6

इससे पहले कि हम रिकॉर्डिंग में कूद, हम करने के लिए सक्षम हमारे ऑडियो ट्रैक रिकॉर्ड की जरूरत है. यह आसान नहीं हो सकता. "आर" आइकन (रिकार्ड तैयार बटन) को ट्रैक हेडर, या निरीक्षक में ऑडियो चैनल पट्टी पर रिकार्ड तैयार बटन पर क्लिक करें. वे दोनों एक और एक ही कर रहे हैं.

अब आप के लिए अपने ऑडियो अंतरफलक से एक संकेत सुनने के लिए सक्षम होना चाहिए. यदि आप ऑडियो एक चैनल पट्टी अनुभाग मैं / हे की जाँच नहीं कर सकते हैं. सुनिश्चित करें कि आपके ऑडियो अंतरफलक पर इनपुट और आउटपुट शारीरिक इनपुट और आउटपुट मैच.

यह एक अच्छा समय है करने के लिए अपने साधन खेलते हैं और यकीन है कि ऑडियो तर्क के लिए आने वाले संकेत कतरन या विकृत कभी नहीं होगा. आप लाभ या आपके ऑडियो अंतरफलक के स्तर पर इनपुट को नियंत्रित कर सकते हैं.


चरण 7

अगला, अगर आप कुछ आधारित गति रिकॉर्डिंग कर रहे हैं, तो आप इस परियोजना की गति को समायोजित करने के लिए की तरह हो सकता है. डिफ़ॉल्ट रूप से एक नई परियोजना 120 bpm की एक गति है. क्लिक करें ट्रैक और प्ले बटन का उपयोग करके आप गति के लिए एक महसूस पाने के लिए और क्या यह भी तेज या धीमी गति से कर सकता है. संख्यात्मक मूल्य पर डबल क्लिक करें और में एक नया मान दर्ज करके फिर गति के मूल्य को समायोजित.


चरण 8

जब आप तैयार हों, परियोजना की शुरुआत (या जो भी बात आप पर रिकॉर्डिंग शुरू करना चाहते हैं) करने के लिए playhead चाल और परिवहन में रिकॉर्ड बटन पर क्लिक करें. तर्क रिकॉर्डिंग शुरू और डिफ़ॉल्ट रूप से एक बार के लिए में गिनती होगी.

प्रेस बंद करो जब आप कर रहे हैं.

अब यह समय अपने प्रदर्शन पर क्लिक करें वापस ट्रैक हैडर पर रिकार्ड तैयार करें बटन पर इसे अक्षम करने के लिए सुनो. इसका मतलब है आप अपने ऑडियो इंटरफ़ेस के माध्यम से निगरानी नहीं के रूप में अच्छी तरह के रूप में क्या तर्क में दर्ज किया गया है सुनने! अब वापस बैठते प्रेस खेलते हैं और अपने दर्ज प्रदर्शन का आनंद लें.

.

और वह सब वहाँ यह है ... इन चरणों नंगे हड्डियों को कवर ... 9 तर्क में ऑडियो रिकॉर्डिंग का पूर्ण मूल बातें. वहाँ तो बहुत अधिक का पता लगाने और मैं वास्तव में काफी तनाव नहीं है कि तर्क गहरी, अद्भुत और बहुत सक्षम है. कैसे में पंच के लिए, रिकॉर्ड और फ़ोल्डर्स ले संपादित में अधिक जानने, COMP लेता है, मक्खी पर पंच, रिकॉर्ड कई निविष्टियाँ, सही समय त्रुटियों, आदि, आदि हमारे विशेषज्ञ तर्क ट्यूटोरियल यहाँ की जांच . 101 तर्क: कोर तर्क 9 तर्क के साथ अपने संगीत यात्रा जारी रखने के लिए सबसे अच्छा स्थान है.

यदि आप आगे इस या किसी अन्य तर्क या मैक सॉफ्टवेयर मुद्दे पर मदद की जरूरत है हमें पर जाएँ www.macprovideo.com/forum/


Preview these Logic Pro Tutorial-Videos

Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video
Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video
Logic 101: Core Logic - Play IconLogic 101: Core Logic - Preview Video
Rounik Sethi

Rounik Sethi

Rounik is the Editor and Lead-Writer on the MPV Hub. As an Apple Certified Trainer for Logic (and a self-confessed Mac fanatic) he's taught teachers, professional musicians and hobbyists how to get the best out of Apple's creative software. He is a Visiting lecturer at Bath Spa University's Teacher training program, facilitating workshops on using iLife and digital media tools in the classroom. If you're looking for Rounik, you'll most likely find him (and his articles) on the macProVideo.com Hub & Forums.

Comments

Sep 01, 2010
joseph pirillo
i am getting feedback when i try to record audio track #2. Audio #1 plays back fine but when I press
the input monitoring button, I get this this loud feedback and shut it down. I know the answer is simple and I have done it before, I am just getting back into recording and am incurring this problem. My system is presonus firebox from a mackie 1202 mixer into a IMac -intel. Hope you can help. Also, any help / insight with bringing video in from IMovie 9 and recording whilst video is playing would be appreciated. Any tips or shortcuts ? thank you, joe
Sep 08, 2010
Rounik
Hello Joe,

Are you using Headphones to monitor the sound or Speakers?

I would check that the connections between firebox and 1202 are correctly routed and check that the input gains are not set too hot.

In Logic, is Audio track's input set to the Firebox's Input 1 or 2? Which input are you trying to record from?

Hope this helps
Rounik
Sep 08, 2010
Rounik
For more info on working with video in Logic, check out this blog post:
http://www.macprovideo.com/blog/logic-pro/started-film-video-logic-scoring-picture

I also recommend this tutorial on scoring to picture. It is fabulous!
http://www.macprovideo.com/tutorial/logic9203

Best
Rounik
Oct 22, 2010
Chuck Wigfall
Hey Guys I just obtained an apogee ensemble, I ned to know if I can run firewire cable to interface from a yamaha motiff,and into the mac pro, for audio recording and play back. //Chuck
Oct 22, 2010
Rounik
Hi Chuck,

From browsing the Yamaha Motif XS site it looks like you can indeed send MIDI and audio over firewire connection. I'm not sure how this would work through the Ensemble...(I've always used MIDI cables / USB to transmit MIDI data and audio cables for audio signal...)

Even if you can't connect directly to the Ensemble you should be able to interface with your Mac directly. I'd ask Yamaha and Apogee directly on this.

Let us know how you get on.

Best
Rounik
Dec 09, 2010
Jason Vearing
Really good tutorial. I can't even get a guitar sound. When I plug into garageband - I go through fast track, I select input fast track, output built in - then somehow I find the mono/ stereo, try out which mono - turn on monitor and eventually I get a signal - so I know that my set up is working.

I then close GB and open up logic, no sound. I change preferences to fast track input, built in out put - no sound. I enable software monitoring - no sound. Starting to get annoyed...

I click on R, still nothing. It seems to me that this might be really easy for people to grasp, but I really struggle just trying to get a signal and I cannot find anybody who posts this problem. Surely I'm not the only one - Can you help?
Dec 10, 2010
Rounik
Hi Jason,

If you're still suffering with this issue post a thread on the Logic forums at macProVideo here:
http://www.macprovideo.com/forum/logic/logic-pro-express

It's easier to follow your progress and post screenshots there.

Thanks
You must be logged in to post a comment.
Create an Account  Login Now

What is macProVideo.com?

macProVideo.com is an online education community featuring Tutorial-Videos & Training for popular Audio & Video Applications including Adobe CS, Logic Studio, Final Cut Studio, and more.
© 2012 macProVideo.com
a division of NonLinear Educating Inc.

About

Our Plans

Tutorials

Community

Help

Legal

Link