All Articles Synths & Sound Design
音响设计:从“舞WIV我Dizzee捣蛋鬼的合成器
Richard Lainhart on Wed, September 14th | 9 comments
Richard Lainhart breaks open Logic Pro's ES2 and shows how to recreate one of the synths from the Dizzee Rascal hit, 'Dance Wiv Me' featuring Calvin Harris.

在这个逻辑音响设计的快速Tutorlal中,我们将着眼于如何创建Dizzee捣蛋鬼“舞蹈WIV ME”(Clavin哈里斯)听到和弦刺的声音:



和弦,我们将重新在0时44视频输入。下面是逻辑的钢琴卷帘所示的部分笔记:

The phrase


第1步 - 最多ES2

我建议你​​输入的音符在弦轨道,让你有什么工作,而你的程序声音本身,首先开始。逻辑的默认EVP88软件仪器工作,所以创建一个新的空的软件乐器的音轨和播放或进入它的音符。之后,切换ES2的 ,这就是我们将使用创建这个声音的软件工具。

下一步,选择模拟锯从ES2的修补程序列表的教程设置的Init补丁;本教程补丁将在我们的声音设计一个良好的开端。

[编者按:退房毛重童车四优“的逻辑的ES2合成器构建模块 ES2的教程声音更多的文章“。]

现在,如果你玩这个声音轨道,你会听到,我们已经有点接近轨道的原始声音,它告诉我们它的锯齿:

[音频ID =“9042”]


听着原来的轨道,你也会听到它有一个很短的,尖锐的信封没有攻击或初始衰减,一个完整的维持,并在很短的释放。 模拟锯INIT已经有这样一个信封设置,所以我们就与移动打扮我们的锯齿。


第2步 - 添加一个振荡器

常常在充分混合的轨道,在混合中的一部分,这是怎么回事就很难说,但它听起来像原来的和弦声音有一点点的翻边或其他处理,增加了一些议案和厚度的声音。那种声音的方法之一是添加另一个振荡器,稍从主振荡器的失谐。

考虑到这一点,使按一下开/关的数量,将其设置为一个普通的锯齿(不同步锯齿波)振荡器2,和几个美分的失谐,向上或向下拖动下'0 C'调节旋钮振荡器2。

下一步,将在振荡器混合均匀混合振荡器1和2的三角形的小广场。您的设置,现在应该是这个样子:

Settings for the first oscillator


第3步 - 添加另一个振荡器

为了使这听起来有点更厚,更添加第三个失谐锯齿:使振荡器3,将它设置为一个锯齿,和失谐振荡器2的相同数额,但在相反的方向。也就是说,如果你失谐振荡器2 2美分,调振荡器3 下跌 2美分。请务必在振荡器3混合,使所有三个振荡器混合均匀混合三角:

Oscillator 3 settings


您的音轨听起来现在应该像这样:

[音频ID =“9045”]


第4步 - 添加了高通滤波器

在这一点上,我们越来越接近原来的声音,但我们现在是有点过于厚的权利。的一个好方法,以减轻它是运行它通过一个高通滤波器,以减少一些较重的较低频率。因此,使确保您的筛选阶段是点击的过滤器开关(这将开启绿色)启用,设置的混合滑块,因此它的所有的交给左边的方式(所以我们只听到过滤器1),并设置过滤器1至Hi(高通)。现在拖动中间点 (截止频率)旋钮:

Filter settings


预览您的轨道,你应该会听到这样的事情,有点轻薄的声音,是一个比较接近原来的轨道:

[音频ID =“9047”]


步骤5 - 添加了一个低通滤波器

现在我们的声音薄,很好,但似乎仍然而不是原来的明亮。那么,让我们删除一些,亮度与低通滤波器。首先,如果你用模拟开始锯初始化补丁,你会发现,调制路由器设置,使过滤器2截止是一个信封,这就需要我们手动设定截止之前禁用控制。您可以通过点击上做

接下来,设置过滤器部分的混合滑块中途,因此,两个过滤器是积极(过滤器部分应该已经在串联模式)。设置过滤器224分贝和脂肪,然后将其截止频率旋钮,使阅读0.8,其中约2点钟位置是:

Low-pass filter settings


发挥你的轨道,你应该会听到这样的事情:

[音频ID =“9048”]


第6步 - 加入合唱团

我们现在非常接近,但原有的声音似乎有一个立体声运动的一点点,我们没有在我们的版本。做到这一点的方法之一是增加一些合唱,这都将提供多一点的厚度为我们的声音,以及一些轻微的立体声议案。

因此,按一下按钮未启用约3点钟位置, 速度 ,9点钟位置alreadythen设置力度,在ES2的影响sectionif合唱:

Adding some chorus


发挥你的轨道,你应该会听到这样的事情,我的耳朵是接近原始声音:

[音频ID =“9049”]


你去那里。一如往常,您应该尝试所有这些设置,看看它们如何影响声音。你甚至可以找到一些变化,您可以使用您自己的曲目。总之,玩得开心!


了解逻辑的ES2在逻辑206 - ES2的裸露

Comments (9)

You must be logged in to comment. Login Now

  • Dekuruy
    Good one, Richard, Thanks!
    • 7 years ago
    • By: Dekuruy
    Reply
  • rlainhart
    You're welcome - glad you liked it.
    • 7 years ago
    • By: rlainhart
    Reply
  • vivid
    i can't get it to sound the same as yours richard! i think it has something to do with the voices option at the top of the es2 because i have followed the tutorial correctly i think. what is your voices number on? and your in poly mode it sounds like? and unison is off? it sounds better more like the sound from the song with just the one saw oscillator on.
    • 7 years ago
    • By: vivid
    Reply
  • vivid
    yes it sounds bad when i add the second and third oscillators but it sounds pretty close to the songs sound with just the one oscillator. however your sound is closer and you have three oscillators on. and yes i have detuned the 2nd and 3rd saw waves to plus two and minus two.
    • 7 years ago
    • By: vivid
    Reply
  • rlainhart
    Hi - ES2 is set to Poly mode, with 6 voices (the same settings as the Analog Saw Init patch we started with.) Try that and see if it helps; if not, let me know and I'll send you a screenshot of the entire interface with all the settings.
    • 7 years ago
    • By: rlainhart
    Reply
  • vivid
    no it doesn't sound like your final sound still. when i add the oscillators 2 and 3 in and detune them appropriately it sounds different to yours, like a dirty sound compared to your clean sound. do you have some sort of flanger effect on your final sound because thats what I'm hearing? i would like a screenshot of your settings thanks. and you have no other effect plugins inserted on that channel? also is unison mode on?
    • 7 years ago
    • By: vivid
    Reply
  • rlainhart
    vivid - there's the built-in ES2 chorus on the sound, as mentioned in the text, but no other channel effects. And ES2 is in Poly mode, as it needs to be to play chords. Here's a link to a shot of the whole ES2 interface, with all settings displayed: http://www.otownmedia.com/ES2_DWM_Screeshot.jpg Some of these settings don't really apply, as they're neutralized or otherwise inactive, but as far as I know, all the other significant settings are mentioned in the text above. If I made a mistake somewhere in the settings or in my explanation, please let me know.
    • 7 years ago
    • By: rlainhart
    Reply
  • vivid
    found the problem, i was detuning the two oscillators by two whole octaves instead of two cents. my mistake. great tutorial btw. sounds very close to the original, i keep comparing. good chance calvin used the es2 to make the sound considering he made the song using logic.
    • 7 years ago
    • By: vivid
    Reply
  • rlainhart
    Great - I'm glad you were able to solve the problem, and thanks for your kind comments too.
    • 7 years ago
    • By: rlainhart
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: