All Articles Ableton Live
라이브를 재생할 때 (Live와) 하드 드라이브 혼란 해결
DJ Wolfie on Sat, April 30th | 5 comments
I'm at a gig, djing with Ableton Live. Half way through my set, I suddenly can't cue tracks. I push the button on my Native Instruments Audio Kontrol 1, nothing. Oh boy. Good thing I know my clips wel

나는 공연에 함께 djing있어 Ableton 라이브 . 내 설정을 통해 절반 방법은, 내가 갑자기 큐 트랙 수 없습니다. 내 기본 인스 트루먼 트에있는 버튼을 오디오 Kontrol 1, 아무것도 밀어. 오, 이런. 제가 잘 내 클립을 알고 다행.

I finish the gig, and I start the long process of uncovering all the things I've done wrong to have this situation occur. My first call of course is to my friend Jon, Author of "Ableton Live 8 Power!". First thing he asks is if I'm using an internal drive, or an external drive. I am in fact using the internal laptop drive for all my music files. I was smart enough to have installed a 7200 rpm drive- many drives are 5400, and considered too slow for music work.

However, what I did was use up 495 gigs out of the available 500 gigs. This resulted in Ableton simply not having enough disc cache available to run properly. With 95% of my drive full, the Drive head has to travel all over the place as well, which slows it down.

첫 번째 팁 그래서, t를 떠나, 난 여유 하드 드라이브 공간 t을 뜻합니다. 최소 10 %.

존 많은 사람들이 더욱 이동하여 음악 샘플 FireWire를 800 드라이브를 사용하여 시스템 작업에 대한 내부 드라이브를두고 있다고 말한다. 여기에 이​​론은 음악 드라이브가 읽기 음악 샘플, 그리고 다른 아무것도에 헌신 한 읽기 머리를 가지고있다는 사실이다. 다시 말하지만, 외부 드라이브가 7200 RPM 있는지 확인하십시오.

시스템과 프로그램은 다음 내부 하드 드라이브의 읽기 헤드가 시스템 운영 및 프로그램 운영 기능을 수행하기 위해 헌신합니다.

두 playheads 한 놀이 머리보다됩니다.

800 왜 파이어 와이어?

모든 Ableton, 로직, 하드웨어 또는 소프트웨어 문제가 있으세요? 방황하지 말고 macProVideo 포럼을 방문하여 도움과 조언을!

Comments (5)

You must be logged in to comment. Login Now

  • Dekuruy
    Thanks, Dj Wolfie for this info. Your noting the advantages of firewire 800 vs. 400 reminded me of something I was wondering about. Can I have my external hard drive before my audio interface? As of now, I've been connecting my interface (MOTU 8pre) to my Mac first, and then connecting my hard drive to the interface. This forces me to use firewire 400 for the hard drive, because my interface is firewire 400 only. It works ok like that, but I've not really put it to the test - which is that I plan on recording sixteen audio channels simultaneously onto the external drive. Will it make a difference if I connect the hard drive to my Mac's firewire 800 port, and then connect the 8pre to the hard drive (that last connection being firewire 400)?
    • 8 years ago
    • By: Dekuruy
    Reply
  • Rounik Admin
    Hey Adam, Some interfaces behave differently in this regard. I've tried both connection methods in the past - though never relying on recording more than 3 audio tracks simultaneously. Both worked well. I'd actually add that USB 2.0 and Firewire 400 are vastly different. The transfer rate numbers may look similar, but in real-world tests Firewire 400 streaming data at about 50MB per second will perform absolutely fine for all but the most demanding of rigs. Also take into account that USB 2.0 can provide fast data transfer in bursts - great for copying data, etc. But for audio and video applications Firewire 400/800 is better because it has a higher 'constant streaming transfer rate' which provides better peformance when streaming (e.g.recording) audio in real-time. So, Firewire 800 is preferable of course(!) - but Firewire 400 will suit the needs of most people and then on top of that the new Thunderbolt technology looks set to blow all the above and USB 3.0 out of the water! In the theory, say good bye to multiple ports on your Mac - instead have a "Thunderbolt hub" with different connections for Firewire, USB2, PCI, Display port, etc devices. :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Dekuruy
    Thanks as always, Rounik, for your thoughtful, thorough, and very helpful response. I'll try testing my rig as it is set up now ( with the external in back of the 8pre, running on firewire 400) and see how it performs. Can't wait for various Thunderbolt devices to come out!
    • 8 years ago
    • By: Dekuruy
    Reply
  • Rounik Admin
    Thanks Adam! I know... Thunderbolt is set to be a massive game changer. I know that Apogee are working on this (audio interfaces) and Lacie and others are cooking up thunderbolt drives. Can you imagine who quick it'll be to backup your Mac over Thunderbolt!! Frightening thought! Anyway, as DJ Wolfie mentions, I'd also recommend using 7200 rpm or faster drives. Then again in a year or two perhaps all drives will be SSD... again - much, much faster and they're quieter as they have no moving parts.
    • 8 years ago
    • By: Rounik Admin
    Reply
  • DjWolfie
    Good question, and thank you Rounik for fielding that one. Excellent points. I have to go look up the thunderbolt tech that you mention. One last point too- firewire 800 tends to have better power supply to bus powered devices. USB runs out of juice much quicker. For instance, I tried using my Vestax vcm 600 and a akai mini keyboard- both usb powered- and I got a error message telling me there wasn't enough juice on the usb port.
    • 8 years ago
    • By: DjWolfie
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: