Despite the abundance of software effects and instruments, something about the character and tactile interface of a real instrument will always appeal to musicians. Luckily, Ableton Live is more than capable of integrating them. In this article, we’ll show you how.
The most important requirement for using external hardware effects or instruments within Live is a multiple input/output soundcard. Every signal that needs to get in or out of Live will need its own dedicated inputs or outputs on the soundcard. Let’s take a look at a simple but typical setup:
All hardware must be connected to the soundcard before it can be used in Live.
In the example above we have a soundcard with 4 mono inputs and 4 mono outputs, a drum machine, a reverb unit and a pair of monitors are connected. The orange lines represent an audio connection and the arrows indicate the direction of the audio. The green line represents a MIDI connection. The more gear you have, the more inputs and outputs you need on your soundcard.
Assuming correct hardware connections are in place, there are a few things to check in Live itself. Head to the Preferences' Audio tab and ensure that any required input and outputs are enabled by clicking the Input Config or Output Config buttons.
Audio inputs and outputs must be enabled in Audio Preferences.
You can choose to use inputs and outputs as mono or stereo pairs.
Any synths and drum machines that are connected via midi will need the relevant MIDI ports enabled in the Preferences' MIDI tab.
Enabling MIDI hardware ports.
Here we can see two ports enabled. The leftmost ON button enables that port to be used for MIDI output. The middle ON button is used to send MIDI clock signal to that output which is useful for any instruments which can sync to clock, such as drum machines.
Now that all the relevant audio and MIDI ports are enabled, let’s take a look at a couple of simple but extremely useful Live devices which will get any external instruments and effects working within Live. The beauty of these two devices is that when properly setup, they will allow hardware instruments and effects to be dropped into a project in exactly the same way as a native Live device, or VST/AU plugin.
The first of the two devices is the External Instrument Device. Head to the Live Device Browser, open the Instruments folder and drag the External Instrument device to a new MIDI track.
Live’s External Instrument device.
Its job, as you might have guessed, is to handle all the routing of audio and MIDI from a particular external instrument. It’s quick and painless to setup:
It’s that simple. Record-arm the MIDI track and play your instrument, either from the instrument itself, or from a connected MIDI controller. Live will handle all the MIDI and audio routing. If you hear a ‘doubling’ of the instrument, it’s possible that you could have direct monitoring enabled on your soundcard. This needs to be disabled.
Because the audio from the instrument is being processed through the Live channel, it can be treated just like any other audio channel. Try adding insert effects or using send busses to add some reverb or delay. You can even Freeze the track just like a software instrument!
The last step is to save your new device. Hit the Save Preset icon in the top tight corner of the device and name it in Live’s browser. Now whenever you want to use that synth or drum machine again, you can just drag it to an empty MIDI track.
The second of our two magic devices, the External Audio Effect device is for external effects units such as reverb, delay, chorus, distortion etc. Head to the Live Device Browser, open the Audio Effects folder and drag the External Audio Effects device to an audio track or return track.
Live’s External Audio Effect device.
There are a few more options to go through on the External Audio Effect device, but again it’s easy to setup:
Remember to save your newly created device so that you can use it in the future without going through this setup again.
So we now have an external hardware unit that will behave exactly like a software effect. Put your newly created device on any audio track to use it as an insert effect or put it on a return track to use it as a send effect.
The hardware effect unit will often have a wet/dry parameter on the unit itself. It is best so set this to 100% wet and then use the Wet/Dry knob on Live’s External Audio Effect device to control the blend.
As you can see, integrating external instruments and effects into Live is relatively simple. There’s nothing quite like playing a real instrument and tweaking real knobs, the immediacy and tactile interface is something that software just can’t replicate. Best of all, you can be confident that Ableton Live will integrate them without fuss.