All Articles Logic Pro
How to Make a Multiband Tube Compressor in Logic Pro
Mike Watkinson on Thu, October 13th 4 comments
While Logic Pro 9 comes bundled with a very capable Multiband Compressor it lacks the circuit types found in the standard compressor. Mike Watkinson wires up a solution using Aux channels.

Logic Pro hasn't got a dedicated multiband tube compressor plugin. There was some speculation that the same compressor circuit type options found in Logic's standard Compressor plug-in would be added to the MultiPressor in version 9, but it was not to be. Maybe in Logic Pro X? In the meantime, you can construct your own using Auxiliary channels. Maybe it's not the quickest way to create a signal processor, but you might be more likely to understand what it is actually doing! 

The idea behind multiband compressors is that you can apply different compression settings to different frequency bands, and in the case of one built with vacuum tubes or valves, each frequency band can take advantage of the unique sonic characteristics that these components can lend to a sound, especially when driven hard.

Creating a Multiband Tube Compressor with 3 Frequency Bands:

  1. Add three stereo auxiliary channels by clicking the '˜+' button on the far left of the mixer (choose the first available bus as the input, and tick the '˜Ascending' box)
  2. Set up a send to each auxiliary channel from the channel that contains the file you are mastering
  3. Set send levels to 0dB by Option-Clicking on the send level
  4. Add a low-pass filter to the first Aux channel (the low end signal), and a hi-pass filter to the third Aux channel (the top end signal) and set the cutoff points to taste
  5. Add a High Cut and a Low Cut filter to the second Aux channel (the mid-range); this is in place of a bandpass filter which Logic does not provide. Set the cutoff points to coincide with those in the lo and hi-pass filters
  6. Add Logic's Compressor plug-in to each auxiliary channel (after the filter)
  7. Set each compressor to the circuit type of your choice (see below)

Now you can make appropriate settings on each compressor: a parallel compression approach is to set the threshold low and the ratio high to create desirable distortion artifacts, then mix these in with the uncompressed signal using the auxiliary channel output faders.

MultiBand tube compression with three bands

Multiband tube compression with three bands.

As an alternative to the use of filters to control the frequency bands, you could use MultiPressors as filters (one in each Aux channel), by soloing the applicable band in each instance of the plug-in, and setting the compression ratio in the MultiPressor to 1:1 so that compression is handled by the Compressor plug-in instead.

MultiBand tube compression using Multipressors as filters

Multiband tube compression using Multipressors as filters.

Although there is no information provided in Logic's documentation, there appears to be general agreement that the Circuit Types in Logic's Compressor are intended to emulate the following classic compressors:

  • Platinum: Emagic's own compression algorithm
  • Class A_R: Neve 2264/33609; the R is for Rupert. This would be vacuum tube style compression
  • Class A_U: Vari-Mu e.g. Fairchild 670/Manley. Again a vacuum tube emulation, but designed to be more transparent than the R.
  • VCA: DBX 160/SSL G-Master buss compressor
  • FET: Urei 1176 or similar
  • Opto: Teletronix LA2A or similar

Find out more about Logic's Compressor and MultiPressor in Logic's Mastering Toolbox and Olav's Electronica Workflows tutorial.

Related Videos
Comments (4)

You must be logged in to comment.

  • GaryHiebner
    Excellent tutorial. I like the idea of using the Multipressor as a frequency splitter. This can come in handy as well to split the frequencies up and apply different effects other than compressors on the different frequency bands for.
    • 9 years ago
    • By: GaryHiebner
  • thirdspace
    Yes - that's a great idea. I particularly like the way you can easily decide to split frequncies into 2,3 or 4 bands! Thanks for the comments Mike Watkinson
    • 9 years ago
    • By: thirdspace
    Does anyone know - Do I need to do this tube compression if sound was already coloured by compressor while it was at mix? Because to colour 2 times the same sound I think isn't a good idea...
    • 9 years ago
    • By: SABOND
  • thirdspace
    Well...the amount of colour you decide to add is completely up to you and what your ears decide. Sometimes a track will need a lot of colour - sparse hip hop for example benefits from extra colour and crunch; busy mixes with lots of distorted sounds (guitars, vocals etc.) might suffer from too much colour. What's important is to have a range of tools available to you so you can tailor your production to the needs of your ears (and your clients of course!)...
    • 9 years ago
    • By: thirdspace
RX 8 - The Video Manual
iZotope RX 8 101
Dream It. Do It.
Do you want to learn RX 8 - The Video Manual ?
Yes, I want to learn!
No Thanks, I just want to read the article.
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: