All Articles GarageBand
5 Essential Workflow-Tipps für GarageBand für iPad
Rounik Sethi on Mon, March 21st 39 comments
When musical inspiration strikes there's nothing worse than needing to navigate a clunky software interface before getting your ideas in place. Fortunately, GarageBand for iPad takes much of the 'inte

Als musikalische Inspiration Streiks gibt es nichts Schlimmeres, als die Notwendigkeit, eine klobige Software-Schnittstelle, bevor sie Ihre Ideen in Ort zu navigieren. Glücklicherweise GarageBand für iPad nimmt viel von der "Schnittstelle Einmischung" entfernt und ermöglicht Ihnen die Hände bekommen, ganz wörtlich, mit Ihrer Musik.

Die große Frage, bei der Erstellung von Musik, ist, ob es schneller ist, eine Maus und-Tastatur nutzen oder auf einem Touchscreen zu verwenden? Ein Touchscreen fehlt die Fähigkeit, praktische Tastenkombinationen ausführen, aber Gewinne aus der Fähigkeit, schnell eine Funktion über eine Geste wie ein Hahn, und Zuziehen, Streichen, etc.

Nun, iOS apps und Touchscreen-Schnittstellen noch in den Kinderschuhen, so dass ich vermute, es wird viele Veränderungen in der Art, wie wir kommunizieren und interagieren mit unserer Tabletten und Computern in den kommenden Jahren. In der Zwischenzeit sind hier 5 meiner Lieblings-GarageBand für iPad Verknüpfungen, die Ihnen helfen, um zu bekommen, und erhalten Sie die Komposition von Musik schneller mit weniger Aufwand wird.

Tipp 1 - Starten Sie die Wiedergabe von überall

Sie können entdeckt, dass durch Antippen oder Ziehen auf dem Lineal können Sie die Abspielposition neu positionieren müssen. Versuchen Sie doppeltes Antippen einer beliebigen Stelle entlang der Abspielkopf, um die Wiedergabe von dieser Position beginnen.

Als zusätzlicher Bonus Spitze, wenn in der Touch Instrument Ansicht können Sie kneifen, um auf dem Lineal auf die Timeline zoom zoom.

Tipp 2 - Show / Hide Track Control

Tippen Sie auf die Registerkarte Mixer (oben rechts auf dem Track View) werden die Steuerelemente für die ausgewählte Spur angezeigt und Sie können ein-oder auszublenden alle Track-Controls.

Allerdings dauert das mindestens 2 Hähne zu diesem Pop-up zu bekommen. Ein schnellerer Weg zum Anzeigen / Verbergen Track Control ist Swipe rechts / links bzw. über die Strecke kontrolliert.

Tipp 3 - Zum Instrument anzeigen Berühren

Einmal in der Spuransicht Wechsel zurück auf das Instrument der Einstellungen umfasst in der Regel tippen auf die Schaltfläche Ansicht in der Systemsteuerung Bar.

Ein anderer Weg ist, um auf das Symbol der Spur Doppel-Tap. Sie werden sofort zu der Ansicht Seite für die Touch-Instrument sein, ohne sich zu bewegen Sie Ihren Arm die paar Zentimeter nach oben Ihr iPad genommen!

Tipp 4 - Volume Control

In Track View doppelt antippen einer Spur Lautstärkeregler, um es den Lautstärkepegel auf 0 dB zurückgesetzt.

Darüber hinaus doppeltes Antippen des Master Volume Regler, um es Lautstärke auf 100% gesetzt. Leider doppeltes Antippen wieder nicht zurückgesetzt die Lautstärke wieder auf 0dB oder die vorherige Einstellung ... aber dies ist nützlich, wenn Sie schnell steigern das gesamte Niveau des Songs wollen.

Tipp 5 - Swipe Gestures Solo und Mute

Dies ist einer meiner beliebtesten Gesten in GarageBand für iPad (und Logic auf dem Mac)! Angenommen, Sie wollen solo den ersten vier Tracks in Ihren Song im Track zu sehen. Ihre normale Route ist auf der Solo-Taster für jede Spur und un-solo wiederholen Sie den Vorgang zu erschließen. Das ist 8 individuelle Armaturen ...

A much more satisfying trick is to swipe up or down along the solo or mute buttons for those tracks. This gives you the ability to swipe mute or swipe solo multiple tracks in one fell swoop!

Wenn Sie GarageBand für iPad Tipps und Tricks zu teilen haben, würden wir sie gerne hören. Wenn Sie irgendwelche haben GarageBand Fragen (iPad oder Mac) Schreiben Sie uns unten einen Kommentar!

Comments (39)

You must be logged in to comment. Login Now

  • Mark
    Anyway to import video from iPad into the ipad garage band
    • 5 years ago
    • By: Mark
    Reply
  • 1. great Page!!! 2. I can't figure out what the Merge Recordings function does on the drum track. 3. is there a way to choose the chords in the smart instruments? 4. if you are powering a usb keyboard keyboard from the ipad via cable the ipad will stop sending juice to the keyboard
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Brett. Thanks! 2. I'll get back to you about Merge recordings for drum tracks when I'm next near my iPad! 3. You can choose the scale for smart instruments. 4. Which USB Keyboard are you using with the iPad? :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Thanks for the tips! Any way to merge tracks?
    • 8 years ago
    • By:
    Reply
  • Ok. Another question: any way to rename tracks or sections? Thanks!
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi brett By merge recording do you mean that while recording in GarageBand for iPad that the section repeats? This allows you (especially when recording drums) to record multiple sounds one at a time. E.g. On the first pass record the kick, then the snare, then third pass the hi hats, etc.
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    Hi Eric, Thanks! There is only one way to merge tracks currently... And that's to export your entire project to an AAC file - however, currently it's not possible to import an AAC file into GB for iPad via iTunes... I'm hopefully an update will appeR to fix that... Again, it's very possible to export your song in a format that will (once an update appears) be editable within GB for Mac. Unfortunately, it's not possible to rename tracks in GB for iPad yet :(
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    An update for GarageBand '11 for Mac has been released today (6.0.2) which "supports opening projects imported from GarageBand for iPad." Anyone tried it yet?
    • 8 years ago
    • By: Rounik Admin
    Reply
  • There is a utube video by a guy named larry jones which shows a technique for saving a mix to itunes and then importing it back into ipad garageband as a new song .It comes back in as a stereo mix and enables multi track overdubs....up to 30 tracks. I cannot seem to get this to work. Anyone know the technique? Thank you...
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Ron, I've tried a few methods to import songs created in GB for Mac into GB for iPad... so far no luck. Can you post the link to this video please. Thanks.
    • 8 years ago
    • By: Rounik Admin
    Reply
  • I was wondering how to import a mixdown track and ran across this blog. I found the video that ron dobbs is talking about. It is at http://www.youtube.com/watch?v=5kRKy418yxk&playnext=1&list=PL78EB07331E6196D1 but the guy doesn't actually show how he brings it back in.
    • 8 years ago
    • By:
    Reply
  • This might be a dumb question, but I can't seem to figure out how to stop the screen from turning off (and thus ending my recording) when I'm doing Audio Recording. Surely there's a simple option for this, I've just missed it? :) Any help is greatly appreciated!
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Beth, I believe this is the "Auto-Lock" feature on the iPad. So return to the Home screen and tap on 'Settings > General > Auto-Lock here you can set the time after which the iPad turns off. :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    @Kent, Thanks for the link. So, this video shows only how to export a full 'song' as a stereo file and then re-import it into a project... but it doesn't show to export a song as a fully editable song and then re-import it via iTunes into GB for iPad. Thanks for the link though :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Thanks Rounik! I've only had my iPad for 6 days, so I hadn't had a chance to learn some of that basic stuff yet. :)
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    That's great Beth! Hope you're enjoying your new iPad and GarageBand for iPad too. If you have any questions or need any software help ask here or on the MPV forums. http://www.macprovideo.com/forum/ :) Best, Rounik
    • 8 years ago
    • By: Rounik Admin
    Reply
  • You can cut out a small piece of a track to remove, say a bad note, and it will smoothly go over the bad part staying in time using the split feature. You can also shrink the ending of tracks so they don't cut off abruptly, making a better ending when you email a finished song. (by tapping the end of a track and dragging the double bars to left a little.
    • 7 years ago
    • By:
    Reply
  • Christian
    Fade out is also a possiblity
    • 6 years ago
    • By: Christian
  • Rounik Admin
    Good tips. Although cutting out a region of one note becomes tricky when you have overlapping notes / sustained notes. Would love for there to be a proper Piano Roll editor.
    • 7 years ago
    • By: Rounik Admin
    Reply
  • How do I access the jigsaw at the top left and what does it do?
    • 6 years ago
    • By:
    Reply
  • Rounik Admin
    Hi! The Jigsaw icon has been removed in the latest update for GB for iOS... you're not missing any functionality by it not being there :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hi, I have a little question: is there a way inserting a blank space at the beginning of a allready recorded song, so I can record a intro? Dragging all tracks is very difficult (impossible) because there are too many small blocks in each track. Or is it possible to convert all blocks in one block. This would make dragging much easier. Thanks for reply. Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, It depends how many bars space you need at the beginning? 1. Tap the + button in the Timeline. This will allow you to create a new section. 2. Tap on The blue arrow next to the new section and manually choose how long this section should be (e.g. 2 bars). 3. Go back to the song sections menu and tap on the "Edit" button. Now drag the new short section to the begging of the song (above the other sections). Done! :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks for quick reply Rounik. I couldn't find Edit-button. What I did : 1. Created a new section B 2. Duplicated section A (recorded song) 3. Section C (=copy section A) comes after section B 4. Deleted section A 5. Section B comes in front of song (now section C) 6. I recorded intro in section B Problem: now I can only replay section B, and section A is not following automatically. How can I fix this, and if not, where can I find the song section menu and the "edit"button? Christian, a learning GB user...
    • 6 years ago
    • By: Christian
  • Rounik Admin
    Hi Christian, I've replied on the MPV forums so I can use images to help the process :) follow this link: http://www.macprovideo.com/forum/audio/garageband/39813 Cheers! R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thank you very much, Rounik! Your reply did solve my issue. I first didn't know that ALL the action took place in the "little" section screen. Thanks again and have a nice day! A happy GB-user...
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian. I'm glad to hear it helped :) Have a great day too and enjoy GB for iPad! Best, R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Still a small question: recording further my song I wonder if all blocks (a result of copy and paste) can be changed in one block so that any dragging or splitting becomes easier in working out the song later? Thanks in advance. Regards, Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, I don't think so unless you render/bounce/export each track down to individual audio files and reimport them into a new song. But that way you'll lose the "easy to edit" MIDI data. You can always export your song and then load it up in GarageBand for Mac where you'll discover more effects, instruments, loops and editing functionality. :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks again for your professional assistance. :)
    • 6 years ago
    • By: Christian
    Reply
  • Melvyn
    Rounik, thanks for your post, the original article, and the questions are very helpful. Do you know if one can edit(split) multiple tracks simultaneously, for example, song has 8 total tracks, but you only want to select 3 of those to split?
    • 6 years ago
    • By: Melvyn
    Reply
  • Rounik Admin
    Hi Melvyn, Thanks! Unfortunately, I've not come across a way to select multiple regions across different tracks. The only workaround I can think of (which would be unsuitable for most purposes) would be to merge tracks and then split the one track. The problem with this is you lose the ability to edit and mix each track individually after they've been merged. Best, R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hello again Rounik, Other little question: intending to buy iPad 3 or 4. Can I transfer GarageBand app and all my songs from my first iPad to the new one without losing or changing things? Thanks for reply.
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, Sure. You can easily sync GB for iOS via iTunes on your Mac/PC or download it from the iTunes store. Also, you can export each of your songs from GB to iTunes from your iPad 1... then import then on your iPad 3... or 4 :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks.
    • 6 years ago
    • By: Christian
    Reply
  • hello. when i import a track to itunes where should i be looking in my ipad to open the file? i can't seem to find it in my itunes. thank u.
    • 6 years ago
    • By:
    Reply
  • Rounik Admin
    Hi, Follow these instructions to share files from your Mac to your iPad: 1. Plug your iPad into your Mac. 2. Select your iPad under "Devices" in the iTunes Library column. 3. Click on the "Apps" tab at the top of the iTunes interface and scroll down to the 'File Sharing" section. 4. Select GarageBand (or other compatible app) and choose "Add". Then select the file from your computer you wish to share with that app on your iPad. Hope this helps Rounik
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hello Rounik, Did the import-export of GB via iTunes. At a certain moment, synchronising my old & new iPad, I lost my GB-app, had to download back GB-app via iTunes. But somewhere, somehow I lost all my songs...I allready had the last takes imported in iTunes, so that's OK. However I can't find the history (earlier takes) of my songs. HELP!!! I'm afraid I lost everything, though I hope you can help me out...Thanks for your reply. Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, I'm sorry to hear that... I've not come across this issue before... it seems that when your gb app was deleted the app data was deleted too... in which case, I'm not sure if it is possible to recover this data. one method that may work is to connect your ipad to your mac and restore your previous backup: http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US hope this helps? Rounik
    • 6 years ago
    • By: Rounik Admin
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: