All Articles GarageBand
iPad用のGarageBandのは5必須ワークフローのヒント
Rounik Sethi on Mon, March 21st | 39 comments
When musical inspiration strikes there's nothing worse than needing to navigate a clunky software interface before getting your ideas in place. Fortunately, GarageBand for iPad takes much of the 'inte

音楽制作のインスピレーションが所定の位置にあなたのアイデアを取得する前に、無骨なソフトウェアインターフェースをナビゲートする必要があるより悪い何もない当たるとき。幸いにも、 iPad用GarageBandは離れてはるかに"インタフェース干渉"のを受け取り、あなたが音楽で、文字通り、上の手を得ることができます。

大きな問題は、音楽を作成するとき、それはマウスと標準キーボードを使用するか、またはタッチスクリーンを使用するより速いのかどうかです?タッチスクリーンは、迅速なキーボードショートカットを実行する能力を欠いているが、すぐにそのようなタップ、ピンチ、スワイプなどのジェスチャーを介して機能を実行する能力益

今、iOSアプリケーションとタッチスクリーンのインターフェースがまだ揺籃期にあるので、私たちは今後数年間で相互作用し、私たちのタブレットとコンピュータとの通信方法に多くの変更があるような気がしている。その間に、ここではあなたの周りを取得して、少ない手間でより迅速に音楽を作って得るのを助けるアプリのショートカットのために私のお気に入りのGarageBandの5です。

ヒント1 - どこからでも再生を開始します。

あなたは、ルーラー上をタップまたはドラッグして再生ヘッドの位置を変更できることを発見している可能性があります。その位置から再生を開始する再生ヘッドに沿って任意の場所をダブルタップしてみてください。

追加のボーナスチップとして、タッチのインストゥルメントのビューでは、タイムラインをズームするルーラーでズームするピンチできるとき。

ヒント2 - トラックコントロールの表示/非表示

Mixerタブ(トラックビューの右上)をタップで選択したトラックのコントロールが表示され、すべてのトラックコントロールを表示または非表示にすることができます。

しかし、それは、このポップアップを取得する少なくとも2つのタップを取ります。トラックコントロールを表示/非表示する速い方法は、スワイプの右側にあります/トラックコントロールを介してそれぞれ残した。

ヒント3 - インストゥルメントの表示にタッチに行く

一度トラックビューで、通常はコントロールバーの[表示]ボタンをタップするインストゥルメントの設定に戻す含ま切り替え。

もう一つの方法は、トラックのアイコンをダブルタップすることです。あなたはすぐにあなたの計算の上にあなたの腕センチメートルのものをいくつか移動することなく、そのタッチのインストゥルメントのためのビューのページにジャンプします!

ヒント4 - ボリュームコントロール

トラックビューでダブル0dBにそれの音量レベルをリセットするには、トラックの音量スライダをタップします。

さらに、100%に、それの音量レベルを設定するには、マスターボリュームのスライダーをダブルタップします。残念なことに、もう一度ダブルタップすると、0dBまたは以前の設定に戻し、音量レベルをリセットしません...あなたが曲の全体的なレベルを迅速に向上する場合が、これは便利です。

ヒント5 - スワイプのソロとミュートジェスチャー

これはiPad用のGarageBandの私の最も愛さジェスチャー(およびMac上でロジック)の一つです!さて、ここでトラックビューでのソロ曲の最初の4つのトラックをしたいとしましょう​​。あなたの通常のルートでは、各トラックのソロボタンをタップすると非ソロプロセスを繰り返すことです。それは、8個のタップです...

A much more satisfying trick is to swipe up or down along the solo or mute buttons for those tracks. This gives you the ability to swipe mute or swipe solo multiple tracks in one fell swoop!

共有するiPadのヒントやトリックの任意のGarageBandをお持ちの場合我々は彼らを聞いてみたい。もしある場合はGarageBandの関連の質問を(iPadまたはMac)を私たちに以下のコメントを削除!

Comments (39)

You must be logged in to comment. Login Now

  • Mark
    Anyway to import video from iPad into the ipad garage band
    • 5 years ago
    • By: Mark
    Reply
  • 1. great Page!!! 2. I can't figure out what the Merge Recordings function does on the drum track. 3. is there a way to choose the chords in the smart instruments? 4. if you are powering a usb keyboard keyboard from the ipad via cable the ipad will stop sending juice to the keyboard
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Brett. Thanks! 2. I'll get back to you about Merge recordings for drum tracks when I'm next near my iPad! 3. You can choose the scale for smart instruments. 4. Which USB Keyboard are you using with the iPad? :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Thanks for the tips! Any way to merge tracks?
    • 8 years ago
    • By:
    Reply
  • Ok. Another question: any way to rename tracks or sections? Thanks!
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi brett By merge recording do you mean that while recording in GarageBand for iPad that the section repeats? This allows you (especially when recording drums) to record multiple sounds one at a time. E.g. On the first pass record the kick, then the snare, then third pass the hi hats, etc.
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    Hi Eric, Thanks! There is only one way to merge tracks currently... And that's to export your entire project to an AAC file - however, currently it's not possible to import an AAC file into GB for iPad via iTunes... I'm hopefully an update will appeR to fix that... Again, it's very possible to export your song in a format that will (once an update appears) be editable within GB for Mac. Unfortunately, it's not possible to rename tracks in GB for iPad yet :(
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    An update for GarageBand '11 for Mac has been released today (6.0.2) which "supports opening projects imported from GarageBand for iPad." Anyone tried it yet?
    • 8 years ago
    • By: Rounik Admin
    Reply
  • There is a utube video by a guy named larry jones which shows a technique for saving a mix to itunes and then importing it back into ipad garageband as a new song .It comes back in as a stereo mix and enables multi track overdubs....up to 30 tracks. I cannot seem to get this to work. Anyone know the technique? Thank you...
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Ron, I've tried a few methods to import songs created in GB for Mac into GB for iPad... so far no luck. Can you post the link to this video please. Thanks.
    • 8 years ago
    • By: Rounik Admin
    Reply
  • I was wondering how to import a mixdown track and ran across this blog. I found the video that ron dobbs is talking about. It is at http://www.youtube.com/watch?v=5kRKy418yxk&playnext=1&list=PL78EB07331E6196D1 but the guy doesn't actually show how he brings it back in.
    • 8 years ago
    • By:
    Reply
  • This might be a dumb question, but I can't seem to figure out how to stop the screen from turning off (and thus ending my recording) when I'm doing Audio Recording. Surely there's a simple option for this, I've just missed it? :) Any help is greatly appreciated!
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    Hi Beth, I believe this is the "Auto-Lock" feature on the iPad. So return to the Home screen and tap on 'Settings > General > Auto-Lock here you can set the time after which the iPad turns off. :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Rounik Admin
    @Kent, Thanks for the link. So, this video shows only how to export a full 'song' as a stereo file and then re-import it into a project... but it doesn't show to export a song as a fully editable song and then re-import it via iTunes into GB for iPad. Thanks for the link though :)
    • 8 years ago
    • By: Rounik Admin
    Reply
  • Thanks Rounik! I've only had my iPad for 6 days, so I hadn't had a chance to learn some of that basic stuff yet. :)
    • 8 years ago
    • By:
    Reply
  • Rounik Admin
    That's great Beth! Hope you're enjoying your new iPad and GarageBand for iPad too. If you have any questions or need any software help ask here or on the MPV forums. http://www.macprovideo.com/forum/ :) Best, Rounik
    • 8 years ago
    • By: Rounik Admin
    Reply
  • You can cut out a small piece of a track to remove, say a bad note, and it will smoothly go over the bad part staying in time using the split feature. You can also shrink the ending of tracks so they don't cut off abruptly, making a better ending when you email a finished song. (by tapping the end of a track and dragging the double bars to left a little.
    • 7 years ago
    • By:
    Reply
  • Christian
    Fade out is also a possiblity
    • 6 years ago
    • By: Christian
  • Rounik Admin
    Good tips. Although cutting out a region of one note becomes tricky when you have overlapping notes / sustained notes. Would love for there to be a proper Piano Roll editor.
    • 7 years ago
    • By: Rounik Admin
    Reply
  • How do I access the jigsaw at the top left and what does it do?
    • 6 years ago
    • By:
    Reply
  • Rounik Admin
    Hi! The Jigsaw icon has been removed in the latest update for GB for iOS... you're not missing any functionality by it not being there :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hi, I have a little question: is there a way inserting a blank space at the beginning of a allready recorded song, so I can record a intro? Dragging all tracks is very difficult (impossible) because there are too many small blocks in each track. Or is it possible to convert all blocks in one block. This would make dragging much easier. Thanks for reply. Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, It depends how many bars space you need at the beginning? 1. Tap the + button in the Timeline. This will allow you to create a new section. 2. Tap on The blue arrow next to the new section and manually choose how long this section should be (e.g. 2 bars). 3. Go back to the song sections menu and tap on the "Edit" button. Now drag the new short section to the begging of the song (above the other sections). Done! :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks for quick reply Rounik. I couldn't find Edit-button. What I did : 1. Created a new section B 2. Duplicated section A (recorded song) 3. Section C (=copy section A) comes after section B 4. Deleted section A 5. Section B comes in front of song (now section C) 6. I recorded intro in section B Problem: now I can only replay section B, and section A is not following automatically. How can I fix this, and if not, where can I find the song section menu and the "edit"button? Christian, a learning GB user...
    • 6 years ago
    • By: Christian
  • Rounik Admin
    Hi Christian, I've replied on the MPV forums so I can use images to help the process :) follow this link: http://www.macprovideo.com/forum/audio/garageband/39813 Cheers! R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thank you very much, Rounik! Your reply did solve my issue. I first didn't know that ALL the action took place in the "little" section screen. Thanks again and have a nice day! A happy GB-user...
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian. I'm glad to hear it helped :) Have a great day too and enjoy GB for iPad! Best, R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Still a small question: recording further my song I wonder if all blocks (a result of copy and paste) can be changed in one block so that any dragging or splitting becomes easier in working out the song later? Thanks in advance. Regards, Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, I don't think so unless you render/bounce/export each track down to individual audio files and reimport them into a new song. But that way you'll lose the "easy to edit" MIDI data. You can always export your song and then load it up in GarageBand for Mac where you'll discover more effects, instruments, loops and editing functionality. :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks again for your professional assistance. :)
    • 6 years ago
    • By: Christian
    Reply
  • Melvyn
    Rounik, thanks for your post, the original article, and the questions are very helpful. Do you know if one can edit(split) multiple tracks simultaneously, for example, song has 8 total tracks, but you only want to select 3 of those to split?
    • 6 years ago
    • By: Melvyn
    Reply
  • Rounik Admin
    Hi Melvyn, Thanks! Unfortunately, I've not come across a way to select multiple regions across different tracks. The only workaround I can think of (which would be unsuitable for most purposes) would be to merge tracks and then split the one track. The problem with this is you lose the ability to edit and mix each track individually after they've been merged. Best, R
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hello again Rounik, Other little question: intending to buy iPad 3 or 4. Can I transfer GarageBand app and all my songs from my first iPad to the new one without losing or changing things? Thanks for reply.
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, Sure. You can easily sync GB for iOS via iTunes on your Mac/PC or download it from the iTunes store. Also, you can export each of your songs from GB to iTunes from your iPad 1... then import then on your iPad 3... or 4 :)
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Thanks.
    • 6 years ago
    • By: Christian
    Reply
  • hello. when i import a track to itunes where should i be looking in my ipad to open the file? i can't seem to find it in my itunes. thank u.
    • 6 years ago
    • By:
    Reply
  • Rounik Admin
    Hi, Follow these instructions to share files from your Mac to your iPad: 1. Plug your iPad into your Mac. 2. Select your iPad under "Devices" in the iTunes Library column. 3. Click on the "Apps" tab at the top of the iTunes interface and scroll down to the 'File Sharing" section. 4. Select GarageBand (or other compatible app) and choose "Add". Then select the file from your computer you wish to share with that app on your iPad. Hope this helps Rounik
    • 6 years ago
    • By: Rounik Admin
    Reply
  • Christian
    Hello Rounik, Did the import-export of GB via iTunes. At a certain moment, synchronising my old & new iPad, I lost my GB-app, had to download back GB-app via iTunes. But somewhere, somehow I lost all my songs...I allready had the last takes imported in iTunes, so that's OK. However I can't find the history (earlier takes) of my songs. HELP!!! I'm afraid I lost everything, though I hope you can help me out...Thanks for your reply. Christian
    • 6 years ago
    • By: Christian
    Reply
  • Rounik Admin
    Hi Christian, I'm sorry to hear that... I've not come across this issue before... it seems that when your gb app was deleted the app data was deleted too... in which case, I'm not sure if it is possible to recover this data. one method that may work is to connect your ipad to your mac and restore your previous backup: http://support.apple.com/kb/HT1414?viewlocale=en_US&locale=en_US hope this helps? Rounik
    • 6 years ago
    • By: Rounik Admin
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: