All Articles GarageBand
GarageBand pour Tutoriel iPad: Configuration
Ian Graham on Wed, May 25th 1 comments
Here in North America the NHL playoffs are now in full swing and perhaps you're inspired to play some rocking organ! With GB on the iPad we get some great keyboard sounds with nifty screen controls! N

Ici en Amérique du Nord éliminatoires de la LNH sont maintenant en plein essor et peut-être vous êtes inspiré pour jouer quelques organes à bascule! Avec GarageBand pour iPad nous obtenons certains sons grand clavier avec des contrôles d'écran sympa! Non seulement nous pouvons utiliser ces touches dans nos chansons qui ont été l'enregistrement, mais comme j'ai expliqué dans un tutoriel récent, le live est aussi une possibilité!


Installation et équipements nécessaires

Il ya quelques choses que nous avons besoin.

  • Controller Keyboard with power supply - There are many to choose from and I use an Axiom Pro 61. You will definitely need the power supply as the iPad does not provide power through it’s dock port. If you want to use the Korg Nano series, you will need a USB hub with power supply.
  • Camera Connection Kit - Our keyboard controller communicates with GB through this device.


Axiom Pro 61

Axiom Pro 61

Apple's Camera Connection Kit

Apple Kit de connexion caméra

Contrôles

Chaque instrument a son propre layout (orgue avec tirettes, des synthés avec des contrôles de filtre), mais aussi il ya quelques fonctions juste au-dessus du clavier et celles-ci varient avec l'instrument choisi. Par exemple, sustain sera au piano, mais pas d'orgue, orgue aura le Rotary Switch pour la Leslie, tous en fonction de l'instrument.


Bien allaient être en utilisant un contrôleur de clavier, si vous voulez utiliser le clavier à l'écran, vous obtenez différents contrôles pour la façon dont votre clavier à l'écran réagit. À l'extrême gauche est un plus et moins d'Octave. Un bouton du milieu pour le glissando, défilement, Pitch, qui varient encore selon l'instrument choisi et le côté droit a une mise en page Échelle, arpégiateur et clavier.

Glissando vous permet de glisser sur les touches comme un clavier réel serait. Pensez au joueur de piano avec le dos de sa main et glisser vers le haut ou vers le bas les touches.

Faites défiler vous permet de jouer une note et en le tenant, faites glisser le clavier vers le haut ou vers le bas. Utile si vous avez besoin pour entrer dans les différentes octaves du clavier écran rapidement.

Pitch est un comme un molette de pitch bend, mais vous permet de terrain de haut ou le bas entre les notes simplement en faisant glisser votre doigt. Parfait pour les synthés vintage!

L'échelle est grande pour les solos, si vous voulez essayer différentes échelles sondage dans un morceau de musique. Dès que vous décrochez l'échelle que vous voulez utiliser, le clavier devient plus semblable à une seule rangée de marimba moins les touches # / b. Si vous utilisez un contrôleur ko, vous aurez encore toutes les notes disponibles mais vous pouvez apprendre ce que les notes sont utilisées par les jouant sur l'IPAD et les correspondants sur votre clavier. Youll bientôt jouer klezmer avec la facilité!


Arpégiateur est votre liberté de jouer plusieurs notes avec une corde maintenue enfoncée. Vous pouvez choisir l'ordre noter, le taux, et la gamme d'octave. Idéal pour les airs de danse ou de votre version de Teenage Wasteland! Malheureusement, l'arpégiateur ne fonctionne pas avec un contrôleur de KB.


“Keyboard Layout/Velocity/Key Controls” - You can choose how you would like the onscreen keyboard to be set up with choices for one or two keyboards and octave range. 

“Velocity” on and off is simple enough but you also can control the velocity range depending on the instrument (no velocity for organ since there is none!) left to the middle of the screen.

“Key Controls” simply turns on and off the view of the middle button for “Glissando”, etc.

There is also a hidden feature that is very cool and similar to an aftertouch on a KB controller. Load in the “Vintage Lead” preset under “Synth Lead” and strike a note. Now move your finger up and down that note... instant filter sweep!



Clavier contrôleur

Plug your keyboard into your Camera Connection Kit and make sure it’s secure as I find it can pop out easily. If it does, you may need to restart your iPad to get control again. Open up GB and navigate to the “Keyboard” instrument. Once this opens you can then select from pianos,organs, synths, etc. by tapping on the instrument in the middle of the screen. You can even store your own presets. 

Again, think of the iPad screen as the controls for the organs drawbars or synths filters. Unfortunately GB won’t record this data during recording. Pitch bend and Mod wheels will respond on your controller as will velocity and after touch. Also, there are no ways to assign a KB controller’s sliders or knobs to say, organ drawbars or synth knobs, although I did find my “master” slider with MIDI CC#7 controlled instrument volume.



Utilisation des instruments intelligents

One feature I wish GB would allow is the use of “autoplay” but controlled via the KB controller. But there are some interesting ideas you can do by combining the “autoplay” feature and your keyboard. For example, select “Smart Keyboard” and choose one of the 4 “autoplay” modes. You then will see 3 bars with a chord on the top bar. The bar with the chord plays both left and right hand accompaniments, the middle bar is right hand only and the bottom is left hand bass. If you hit the top bar, you could solo on the KB controller. The middle bar could allow you to try bass combinations such as G-G/F-G/E or perhaps a piano bass line with a distinctive melody. Be careful though as the sustain is used most likely and can mush up your sound in the bass line. Using the bottom bar would allow you again more right hand solos or your own accompaniment.



If you want any electric or acoustic bass instruments, you will need to use “Smart Bass”. Using the acoustic bass gives a feature that is hard to emulate on the KB controller unless you get good with the pitch bend wheel... sliding your finger along a fretless neck. Simply select Acoustic Bass, switch the “Chords” to “Notes” and tap on the screen. It adds some realism to the bass line and with some practice, can give some convincing results. Further editing can be done on GB on your Mac.




“Smart Guitar” is very similar to the smart keyboard and bass features with one additional feature. If you use your KB Controller, you can strike chords on your keys!Now you can use the “autoplay” feature for arpeggiated chords and “strum” chords on your keyboard. Great too for having ostinato picking patterns with multiple chord changes. 



Astuces d'enregistrement

First and foremost... PRACTICE! Yes... I said that again as I did in the last tutorial. GB on the iPad does not allow editing like GB on a Mac . Not even MIDI editing for wrong notes. Maybe in version 2... BUT... you can slow down the tempo, unlike the Guitar/Audio recording section, and speed it up after. If needed later, you can open up the song on your Mac and edit it there. You also can save time by recording repetitive parts and then looping them. Simply record your part, double tap on the track region and select “Loop”.



If your timing is not that great or you need to tighten up a section, “Quantization” will help. Simply tap on the top right “Mixer” in the Track view and select your quantization value. Use the fastest value you played. For example, if a lead synth line played as fast as 16th notes, use the 1/16 Note value. Quantization will also affect all of the tracks regions in a section! But... you can have different quantization on each section if a part gets moved from one section to another. Confused? Yeah... me too at first. If you quantize a part in Section A to 1/8 notes but then move it to Section B that is quantized to 1/16 notes, the new part will show “Multiple”. This is something I seriously hope Apple fixes as it’s frustrating if you need multiple quantizations within a section.



Also, don’t be afraid to record a part and try different instruments as your song may take on a whole new flavor choosing a clav instead of a piano for example. Try duplicating the track with a similar synth but with a different filter cutoff and panned hard left and right. Or use two totally different synths. Bass lines can get really fat with this idea! Slow your song down and play in your own idea of an arpeggiated pattern... speed up and loop!

Stay tuned for more GarageBand for iPad tips and tutorials. Till next time...don’t drive your neighbors nuts with the Minimoog playing Axel F or Tom Sawyer synth leads.


Comments (1)

You must be logged in to comment. Login Now

  • Djdrdru
    "Unfortunately, the arpeggiator does not work with a KB Controller." Yes this is very unfortunate, and I can't imagine WHY is there some reason for making it that way?!?
    • 4 years ago
    • By: Djdrdru
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: