All Articles Logic Pro
منطق امتیاز دهی امتیاز دهی به ویدئو : ترفندهای همگام سازی های صوتی
Steve H on Sun, November 14th 2 comments
Foreword by Rounik Sethi: Logic is a fantastic tool to use when scoring sound to video. However, there are some well-discussed limitations, and in the Logic-world that inevitably means are some less w

Foreword by Rounik Sethi: Logic is a fantastic tool to use when scoring sound to video. However, there are some well-discussed limitations, and in the Logic-world that inevitably means are some less well-known workarounds too. One such limitation occurs when importing the "sync" audio from a video into Logic's Arrange area: Adjusting the start point of the video and then selecting a "bar 1" sync point that exceeds 8 bars into the video will always create the issue that Logic will limit the amount of "negative audio" to 8 bars and audio sync will be lost. Of course there have been some workarounds for this Logic quirk many of which have been explored in detail over the years. Steve H explores this very topic in his popular Logic 203: Logic's Music for Picture Toolbox tutorial. In this tutorial, Steve H joins us below to advise on the most efficient work flows that will always keep your audio and video in sync...

01 -- حل منفی 8 نوار محدود

یک راه حل ، که من در من نشان می دهد موسیقی منطق برای آموزش تصویر جعبه ابزار ، این است که حرکت نقطه لنگر به پایان بسیار از منطقه (و یا حداقل در 8 میله نوار 1 نقطه همگام با).

من پیشنهاد می کنم انجام این عملیات در ویرایشگر نمونه زیرا قبل از شما حرکت لنگر شما ابتدا باید دستور ویرایشگر نمونه را انتخاب کنید ، قفل ترتیب موضع در زمانی که حرکت لنگر "

در ویرایشگر نمونه را انتخاب کنید : ویرایش

02 -- گردش کار

  1. Import audio
  2. Unlock the video's audio's SMPTE position
  3. Open the video's audio region in the Sample Editor
  4. Then choose "Lock Arrange Position When Moving Anchor". You can do this with a Key Command or by Control Clicking on the anchor's lane!
  5. Zoom out in the Sample Editor and slide the anchor point the the end of the region (or, at the very least, past the intended start point... I chose the end of the region because then I'll know that I can place bar 1 anywhere but it really just needs to be within 8 bars of the new bar one sync point!)
  6. Go back to the arrange and re-lock the audio region's SMPTE position.

در حال حاضر در تنظیمات سنکرون پروژه شما می توانید نوار 1 یک نقاط و محل های صوتی همگام شما را به بالا و به منفی بدون از دست دادن همگام!

تمامی این عملیات را می توان با دستورات کلیدی به جز حرکت دادن نقطه لنگر انجام می شود. متاسفانه ، شما می توانید این تابع را در سطل های صوتی که در آن کل منطقه در فشرده نمایش داده انجام نیست ، چون رفو قفل ترتیب و موقعیت "دستور تنها در ویرایشگر نمونه وجود دارد!

را انتخاب کنید فایل

با این حال ، با زوم از در ویرایشگر نمونه قبل از نقطه لنگر را به اسلاید شما هنوز هم می تواند این کار را در نظم بسیار کوتاه انجام.

03 -- لیست خواسته های کلیدی فرماندهی

برای این کارا من می خواهم برای تیم منطق مراجعه کنید ایجاد یک چند دستورات کلید جدید :

  • Lock Arrange Position When Moving Anchor (in the Audio Bin and Arrange)
  • Move Region Anchor Point to Region End (...everywhere!)
  • Move Region Anchor Point to Playhead

... یا فقط گزینه ای به نقطه لنگر مطابقت نوار 1 / SMPTE موقعیت زمانی که تنظیم خود را نوار 1 سنکرون نقطه به طور خودکار انجام مراحل 1-6 فوق داشته باشد!

من امیدوارم که این کمک می کند! این نوع از چیزهایی است که بسیار آسان تر نشان می دهد در فیلم!

Related Videos
Comments (2)

You must be logged in to comment.

  • mjm
    Great Tip!!! However - I'm having a problem. I'm creating a master project from which I'll create my individual cue projects. What I want to do is import my audio from my movie and move the anchor to the end of that region in my master so I only have to do it once. My reasoning is, I can Save As to a subsequent cue and then change my start point. The problem I'm having is, when I move the anchor too far, maybe 8 minutes into a 15 minute short, the audio stops playing back. When I back it up, it works again. And recommendations to solve this? Thanks. But aside from this bug, it's a great time saving tip.
    • 9 years ago
    • By: mjm
  • steveH
    I don't know why you're running into that issue. Why work with such a big chunk of video? If you've got vis code you can cut the video into scenes using your locators and your "Export Audio to Movie" command to create smaller... usable chunks.
    • 9 years ago
    • By: steveH
Overbridge 2
Elektron 108
Dream It. Do It.
Do you want to learn Overbridge 2?
Yes, I want to learn!
No Thanks, I just want to read the article.
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: