All Articles Logic Pro
तर्क वीडियो स्कोरिंग: ऑडियो तुल्यकालित गुर
Steve H on Sun, November 14th 2 comments
Foreword by Rounik Sethi: Logic is a fantastic tool to use when scoring sound to video. However, there are some well-discussed limitations, and in the Logic-world that inevitably means are some less w

Foreword by Rounik Sethi: Logic is a fantastic tool to use when scoring sound to video. However, there are some well-discussed limitations, and in the Logic-world that inevitably means are some less well-known workarounds too. One such limitation occurs when importing the "sync" audio from a video into Logic's Arrange area: Adjusting the start point of the video and then selecting a "bar 1" sync point that exceeds 8 bars into the video will always create the issue that Logic will limit the amount of "negative audio" to 8 bars and audio sync will be lost. Of course there have been some workarounds for this Logic quirk many of which have been explored in detail over the years. Steve H explores this very topic in his popular Logic 203: Logic's Music for Picture Toolbox tutorial. In this tutorial, Steve H joins us below to advise on the most efficient work flows that will always keep your audio and video in sync...

01 - नकारात्मक 8 बार सीमा का हल

एक समाधान है, जो मैं अपने शो में चित्र उपकरण बॉक्स ट्यूटोरियल के लिए तर्क संगीत , क्षेत्र के बहुत अंत (या कम से कम के साथ पट्टी एक सिंक बिंदु के 8 बार में) के लिए लंगर बिंदु को स्थानांतरित करने के लिए है.

, मैं नमूना संपादक में इस कार्रवाई कर रही है क्योंकि इससे पहले कि आप लंगर चाल आप पहली बार नमूना संपादक आदेश का चयन जरूरी सुझाव "बंद स्थिति व्यवस्थित जब एंकर चलती है

नमूना संपादक में, चुनें संपादित करें:

02 - कार्यप्रवाह

  1. Import audio
  2. Unlock the video's audio's SMPTE position
  3. Open the video's audio region in the Sample Editor
  4. Then choose "Lock Arrange Position When Moving Anchor". You can do this with a Key Command or by Control Clicking on the anchor's lane!
  5. Zoom out in the Sample Editor and slide the anchor point the the end of the region (or, at the very least, past the intended start point... I chose the end of the region because then I'll know that I can place bar 1 anywhere but it really just needs to be within 8 bars of the new bar one sync point!)
  6. Go back to the arrange and re-lock the audio region's SMPTE position.

अब परियोजना सिंक्रनाइज़ेशन सेटिंग में आप एक बार एक कहीं भी जगह और अपने सिंक ऑडियो नकारात्मक में सिंक खोने के बिना वापस कर सकते हैं!

इन सभी आपरेशनों सिवाय लंगर बिंदु हिल कुंजी आदेश के साथ पूरा किया जा सकता है. दुर्भाग्य से, आप जहां पूरे क्षेत्र में दृढ़तापूर्वक प्रदर्शित ऑडियो बिन में इस समारोह पूरा नहीं, क्योंकि व्यवस्था रफ़ू "लॉक स्थिति" कमांड केवल नमूना संपादक में मौजूद कर सकते हैं!

फ़ाइल चुनें

हालांकि, नमूना संपादक में बाहर zooming इससे पहले कि आप लंगर बिंदु स्लाइड से तुम अब भी बहुत कम क्रम में इस कार्य को पूरा कर सकते हैं.

03 - कुंजी कमान काश सूची

यह अधिक मैं देख तर्क टीम कुछ नया कुंजी आदेश बनाने के लिए करना चाहते कुशल बनाने के लिए:

  • Lock Arrange Position When Moving Anchor (in the Audio Bin and Arrange)
  • Move Region Anchor Point to Region End (...everywhere!)
  • Move Region Anchor Point to Playhead

... या बस के लिए लंगर बिंदु बार 1 / SMPTE स्थिति मैच जब आपके बार एक सिंक बिंदु की स्थापना स्वचालित रूप से कदम 1-6 ऊपर कर विकल्प होता है!

मुझे उम्मीद है कि इस मदद करता है! ये चीजें हैं जो इतना आसान वीडियो में दिखाने के कर रहे हैं के प्रकार हैं!

Related Videos
Comments (2)

You must be logged in to comment.

  • mjm
    Great Tip!!! However - I'm having a problem. I'm creating a master project from which I'll create my individual cue projects. What I want to do is import my audio from my movie and move the anchor to the end of that region in my master so I only have to do it once. My reasoning is, I can Save As to a subsequent cue and then change my start point. The problem I'm having is, when I move the anchor too far, maybe 8 minutes into a 15 minute short, the audio stops playing back. When I back it up, it works again. And recommendations to solve this? Thanks. But aside from this bug, it's a great time saving tip.
    • 9 years ago
    • By: mjm
  • steveH
    I don't know why you're running into that issue. Why work with such a big chunk of video? If you've got vis code you can cut the video into scenes using your locators and your "Export Audio to Movie" command to create smaller... usable chunks.
    • 9 years ago
    • By: steveH
Elektron 109 - Cycles Explored
Elektron 109
Dream It. Do It.
Do you want to learn Elektron 109 - Cycles Explored?
Yes, I want to learn!
No Thanks, I just want to read the article.
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: