All Articles Logic Pro
Tutorial: automatización en tiempo real Tempo de Medio Ambiente de Logic
Rounik Sethi on Sat, November 27th 10 comments
Learning how to automate levels, pan and virtually any plug-in control in Logic opens a whole world of possibilities when mixing your music. Not only can you draw automation offline but you can also r

Aprender a automatizar los niveles, pan y prácticamente cualquier plug-in de control de Logic se abre todo un mundo de posibilidades a la hora de mezclar su música. No sólo es posible extraer la automatización en línea, pero también puede grabar la automatización en tiempo real en demasiado. Sin duda, este puede ser uno de los aspectos más divertidos de la mezcla! Gracias a Global Tracks, en la lógica, es posible crear cambios de tempo en línea. Y, si usted está mirando para crear cambios de tempo en tiempo real y registrar los movimientos tempo a sus pistas Tempo Global? Esto sería ideal para la creación de un mapa de tempo rápido o tocar en vivo. A primera vista parece que no se puede hacer. Pero nunca digas nunca a la hora de Medio Ambiente de Logic ...

01 - Introducción

Open an existing Logic project or create a new one. Create as many tracks as you need plus an extra one. It doesn't matter what type of track as we'll reassign it later.

En este caso he creado dos pistas de audio.

02 - Ir Ambiental

Open a New Environment window from Window > Environment (Command+8).
Navigate to the Clicks & Ports layer.

03 - Tiempo de Fader

En Medio Ambiente de Logic puede establecer la entrada y salida de los deslizadores para un gran número de diferentes mensajes MIDI. Allí, algunos 'preset' faders ya está configurado para controlar determinadas funciones. Usted puede encontrar un deslizador para controlar el tempo aquí en el menú emergente, el de Medio Ambiente:

Nuevo

You'll get an alert message which warns you that to use the Tempo Fader to record it's values to Logic's Tempo control it must be cabled directly into the Sequencer Input object. Click OK to continue.

Su Fader Tempo debería ser algo como esto.

04 - tamaño lo es todo

You can resize any Environment object by selecting it and dragging on the white square in the lower right corner. The larger the Fader the more accurate you can be when creating tempo changes.

Además, vamos a hacer que esta ventana de Medio Ambiente en una ventana flotante por lo que siempre aparece en la parte superior. Elija: Ver

05 - Control de Tempo

Before we cable the new Fader to any other object, try moving the level and look at your Transport Display. You'll notice that we are controlling Logic's tempo!

Sin embargo, si usted comienza la reproducción de mover el fader de transporte, pulse Detener y reanudar la reproducción de nuevo, te darás cuenta de que el tempo de Logic vuelve al valor inicial.

06 - Global Tracks

Antes de continuar y realizar la conexión que nos permita registrar estos movimientos Fader Tempo en la lógica, vamos a echar un vistazo a la forma de visualizar el "mapa de tempo" en la lógica.

First up is the Tempo Global Track. Click on the Global Tracks disclosure triangle (or press "G" on your keyboard) to expand the Global Tracks area. Resize the Tempo Global Track as desired.

07 - Lista de Tempo

Abra el área de las listas y haga clic en la ficha Tempo. Tanto la pista de tempo global y la lista de Tempo ofrecer formas alternativas de ver (y crear) el mapa de tempo (s) para su proyecto.

08 - Cable que

Ahora bien, para registrar el valor de la Fader Tempo BPM en la pista de tempo global que necesitamos para el cable de salida de nuestro Fader Tempo (en el Medio Ambiente) en la entrada del secuenciador.

No tenemos al cable directamente, siempre y cuando la señal de nuestra Fader Tempo llega a la entrada del secuenciador ... Así, por ejemplo, puede arrastrar el triángulo en la parte superior derecha de la Fader y conecte el cable resultante de la "Vista de entrada" u objeto "Notas de entrada" ya que son conectados a la "Entrada de cadena" de todos modos.

Having said that, I've the cabled the output from my Tempo Fader directly into the Sequencer Input as shown in the image below:

09 - Nueva pista Tempo

Esto no es un paso necesario, pero es que yo prefiero hacer para mantener las cosas organizadas. Vamos a ceder nuestros Fader Tempo a una pista existente en el área Organizar. Hay tres maneras fáciles de hacer esto, pero mi método preferido es arrastrar y soltar.

Position the Environment window so that you can see the Arrange area's Track Headers. If you haven't already done so, now is a good time to create an extra track (any type will do). Now simply drag the Tempo Fader in the Environment window on to a Track Header in the Arrange area to reassign it.

10 - automatización en tiempo real Tempo

El último paso es colocar la cabeza de reproducción en la que desea comenzar a automatizar el tempo, pulse el botón de grabación y empezar a mover el fader Tempo como se desee.

Usted no verá ninguna información de tempo que se escriben en la pista de tempo global o la lista de Tempo, mientras que

Ahora puede editar la información de tempo, ya sea en la lista de Tempo o Pista de tempo global como se desee.

¿Quieres saber más lógica y la lógica de consejos y trucos para el Medio Ambiente? Te encanta este tutorial entonces !

Comments (10)

You must be logged in to comment.

  • Jason
    I know this post is pretty old, but I just found it and found it really helpful! A followup question though: Do you know if there's a way to assign this fader to a physical fader on a midi controller? I've not been able to sort it out. THANKS!
    • 4 years ago
    • By: Jason
    Reply
  • Rounik Admin
    Hi Jason, Sure! What you'll need to do (from memory because I'm not in front of Logic right now) is 1. in the Environment window go to the Clicks & Port layer... 2. Move the physical fader and look at the messages coming through the "Input View". This view will show you the MIDI Control channel | parameter | value... remember the channel and parameter values. 3. go to the Real-time tempo fader in the environment that you've created and select it. 4. In the Inspector on the left change its INPUT channel, "-1-" (parameter) and value range to match the physical values. That should work :-)
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, thank you so much for this really easily understandable and functioning tutorial! I have a question, that is somehow connected to that topic but goes a little bit deeper: - I am Working with audio material! Is there a way to change the Tempo in realtime without having a quality loss? Thank you so much for you help! Cheers, Samuel
    • 4 years ago
    • By: Samu
    Reply
  • Rounik Admin
    Hey Samu, Glad you found the article helpful :) There will always be some kind of quality loss when changing tempo with audio, especially in real-time. Can you describe what it is you're doing in more detail? Perhaps there's another way to approach this. Also, are you using Logic Pro only, or could you use Ableton Live or other software too? Best, Rounik
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, thanks for replying! Seriously, I couldn't find an article like that in any other forum or site! Funny your suggesting Ableton live cause that's what my professor suggested to me too... I was also thinking about using MaxForLife or even MaxMsp since they're communicating so well with Ableton live, are you familiar with that? I'm still at the beginning of the project but it feels like it's gonna get big... It's about Music and running! I will have a constant stream of two open bluetooth signals from a stride sensor and a hear rate sensor coming into MaxMsp (in case I don't come up with something better), calculate a certain value from these and determine the tempo of either a audio material session or a midi session, not sure yet! In case of Midi: depending on the current tempo in the session certain instrument tracks, effects etc. should be activated In case of Audio: Depending on the tempo certain songs (that were loaded into an player and analyzed in advance) should be faded in and played without leaving a break between the different songs so a constant running music is played back! Could I express my idea understandably? Thank you so much for your help and interest, Samuel
    • 4 years ago
    • By: Samu
    Reply
  • Rounik Admin
    Hey Samu, Thanks. This sounds like a really interesting project. I think Ableton might be better suited.. but you can try this in Logic. What I'd suggest doing one of the following. Either: 1. make sure all your audio regions are tempo-enabled apple loops or 2. Create sampler instruments from each audio region and play those back. Now this would work better if the audio is rhythmic rather than melodic, but it'd be an interesting experiment to try! Oh wait... will the audio be recorded in real-time too? will that be from one of the bluetooth signals? Let us know how you get on :)
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, I was messing around with apple loops but thats not the way I'm gonna work, it's not flexible enough... I'm afraid I have to use Ableton (which I never used before) because of the really well functioning "warping algorythm"... Are you exclusively working with Logic?
    • 4 years ago
    • By: Samu
    Reply
  • Samu
    Hello Rounik, it's Samuel again. My project changed a lot and I'm back in Logic. I figured how to use a external hardware device (with knobs etc.) but I have a new problem: I want to send a midi signal form another program (max/msp) to Logic to control the tempo of a midi file. I can see the the values in the input view but can't route them to the tempo fader :( Could you explain me how to do that? Thank in advance!!! Samuel
    • 4 years ago
    • By: Samu
    Reply
  • logicluvva
    Inspiring & as always, thoughtfully paced and therefore fully appreciated. Thanks
    • 8 years ago
    • By: logicluvva
    Reply
  • Rounik Admin
    Thanks logicluvva! Glad this tutorial has been helpful :)
    • 8 years ago
    • By: Rounik Admin
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: