All Articles Logic Pro
자습서 : 로직의 환경에서 실시간 템포 자동화
Rounik Sethi on Sat, November 27th | 10 comments
Learning how to automate levels, pan and virtually any plug-in control in Logic opens a whole world of possibilities when mixing your music. Not only can you draw automation offline but you can also r

레벨, 팬 및 음악을 혼합하면 거의 모든 로직 제어 플러그인은 가능성의 세상을 여는를 자동화하는 방법을 학습. 뿐만 아니라 오프라인 자동화를 그릴 수 있지만 당신은 또한 너무에 실시간으로 자동화를 기록할 수 있습니다. 의심의 여지없이이 혼합의 더 재미 측면 중 하나가 될 수 있습니다! 논리의 글로벌 트랙 덕분에, 그것은 오프라인 템포 변경을 만들 수도 있습니다. 그리고, 당신이 실시간으로 템포의 변화를 만들고 템포 글로벌 트랙 템포의 움직임을 기록 찾고있다면? 이것은 빠른 템포의지도를 만들거나 라이브를 재생하기 위해 좋은 것입니다. 언뜻 그것이 할 수없는 것 같습니다. 그것이 논리의 환경에 올 때 그러나 결코 아무에게도 말하지 않을 ...

01가 - 시작하기

Open an existing Logic project or create a new one. Create as many tracks as you need plus an extra one. It doesn't matter what type of track as we'll reassign it later.

이 경우 저는 두 오디오 트랙을 만들었습니다.

02 - 환경 이동

Open a New Environment window from Window > Environment (Command+8).
Navigate to the Clicks & Ports layer.

03 - Fader 시간

논리의 환경에서는 입력 및 다른 MIDI 메시지의 과다로 faders에 대한 출력을 설정할 수 있습니다. 가 이미 특정 기능을 제어하는​​ 설정 몇 가지 '미리'faders 있습니다. 당신은 환경의 로컬 메뉴에서 여기에 템포를 제어할 수 fader를 찾을 수 있습니다 :

새로운

You'll get an alert message which warns you that to use the Tempo Fader to record it's values to Logic's Tempo control it must be cabled directly into the Sequencer Input object. Click OK to continue.

당신의 템포 fader이 다음과 같이해야합니다.

04 - 사이즈 다 있습니다

You can resize any Environment object by selecting it and dragging on the white square in the lower right corner. The larger the Fader the more accurate you can be when creating tempo changes.

또한 항상 상단에 나타납니다 그러니 부동 윈도우에 이러한 환경 창을합시다. 선택보기

05 - 관리 템포

Before we cable the new Fader to any other object, try moving the level and look at your Transport Display. You'll notice that we are controlling Logic's tempo!

그러나 재생 전송 Fader를 이동 시작하면, 그만을 누른 후 다시 재생을 재개, 그 논리의 템포는 초기값으로 돌아갑니다 알 수 있습니다.

06 - 글로벌 트랙

우리가 계속 우리가 논리에이 템포 Fader의 움직임을 기록 수 있도록 연결하기 전에, 이제 로직에서 '템포지도'를 시각화하는 방법에 대해 살펴보겠습니다.

First up is the Tempo Global Track. Click on the Global Tracks disclosure triangle (or press "G" on your keyboard) to expand the Global Tracks area. Resize the Tempo Global Track as desired.

07 - 템포 목록

목록 영역을 열고 템포 탭을 클릭합니다. 템포 글로벌 트랙과 박자리스트 모두 프로젝트에 보는 다른 방법 (및 작성) 템포지도 (들)을 제공합니다.

08 - 케이블 그것

이제 템포 글로벌 트랙에 템포 Fader의 BPM의 가치를 기록하기 위하여 우리는 케이블 시퀀서 입력에 우리의 템포 Fader (환경​​에서)의 출력을해야합니다.

우리는 직접 한 우리 템포 Fader의 신호로 시퀀서 입력에 도달 케이블을 가지고 있지 않다 ... 그래서, 예를 들어, Fader의 오른쪽 상단에있는 삼각형에서 드래그 수 있으며, 그들은 어쨌든 "시퀀서 입력"을 cabled대로 "입력보기"또는 "입력 정보"개체에 대한 결과 케이블을 연결합니다.

Having said that, I've the cabled the output from my Tempo Fader directly into the Sequencer Input as shown in the image below:

09 - 새로운 템포 트랙

이것은 필요한 단계는 아니지만 그것은 내가 뭔가를 구성하게 할 것을 선호 하나. 우리는 배열 영역에서 기존 추적하기 위해 템포 Fader를 할당하는거야. 거기에 이렇게 쉬운 3 가지 방법이 있습니다,하지만 내 선호하는 방법은 드래그 앤 드롭합니다.

Position the Environment window so that you can see the Arrange area's Track Headers. If you haven't already done so, now is a good time to create an extra track (any type will do). Now simply drag the Tempo Fader in the Environment window on to a Track Header in the Arrange area to reassign it.

10 - 실시간 템포 자동화

마지막 단계는 당신이 템포를 자동 시작하고자하는 재생 헤드를 배치 녹음 버튼을 누르고 원하는대로 당신의 템포 Fader 이동 시작하는 것입니다.

당신은 글로벌 템포 트랙 또는 템포 목록에 기록되는 모든 템포 정보는 반면 표시되지 않습니다

이제 원하는대로 템포 목록이나 템포 글로벌 트랙 중 하나에이 템포 정보를 편집할 수 있습니다.

더 많은 논리와 논리 환경 팁 및 유용한 정보를 배우고 싶습니까? 당신은 할게 다음이 튜토리얼을 사랑 !

Comments (10)

You must be logged in to comment. Login Now

  • Jason
    I know this post is pretty old, but I just found it and found it really helpful! A followup question though: Do you know if there's a way to assign this fader to a physical fader on a midi controller? I've not been able to sort it out. THANKS!
    • 4 years ago
    • By: Jason
    Reply
  • Rounik Admin
    Hi Jason, Sure! What you'll need to do (from memory because I'm not in front of Logic right now) is 1. in the Environment window go to the Clicks & Port layer... 2. Move the physical fader and look at the messages coming through the "Input View". This view will show you the MIDI Control channel | parameter | value... remember the channel and parameter values. 3. go to the Real-time tempo fader in the environment that you've created and select it. 4. In the Inspector on the left change its INPUT channel, "-1-" (parameter) and value range to match the physical values. That should work :-)
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, thank you so much for this really easily understandable and functioning tutorial! I have a question, that is somehow connected to that topic but goes a little bit deeper: - I am Working with audio material! Is there a way to change the Tempo in realtime without having a quality loss? Thank you so much for you help! Cheers, Samuel
    • 4 years ago
    • By: Samu
    Reply
  • Rounik Admin
    Hey Samu, Glad you found the article helpful :) There will always be some kind of quality loss when changing tempo with audio, especially in real-time. Can you describe what it is you're doing in more detail? Perhaps there's another way to approach this. Also, are you using Logic Pro only, or could you use Ableton Live or other software too? Best, Rounik
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, thanks for replying! Seriously, I couldn't find an article like that in any other forum or site! Funny your suggesting Ableton live cause that's what my professor suggested to me too... I was also thinking about using MaxForLife or even MaxMsp since they're communicating so well with Ableton live, are you familiar with that? I'm still at the beginning of the project but it feels like it's gonna get big... It's about Music and running! I will have a constant stream of two open bluetooth signals from a stride sensor and a hear rate sensor coming into MaxMsp (in case I don't come up with something better), calculate a certain value from these and determine the tempo of either a audio material session or a midi session, not sure yet! In case of Midi: depending on the current tempo in the session certain instrument tracks, effects etc. should be activated In case of Audio: Depending on the tempo certain songs (that were loaded into an player and analyzed in advance) should be faded in and played without leaving a break between the different songs so a constant running music is played back! Could I express my idea understandably? Thank you so much for your help and interest, Samuel
    • 4 years ago
    • By: Samu
    Reply
  • Rounik Admin
    Hey Samu, Thanks. This sounds like a really interesting project. I think Ableton might be better suited.. but you can try this in Logic. What I'd suggest doing one of the following. Either: 1. make sure all your audio regions are tempo-enabled apple loops or 2. Create sampler instruments from each audio region and play those back. Now this would work better if the audio is rhythmic rather than melodic, but it'd be an interesting experiment to try! Oh wait... will the audio be recorded in real-time too? will that be from one of the bluetooth signals? Let us know how you get on :)
    • 4 years ago
    • By: Rounik Admin
    Reply
  • Samu
    Hey Rounik, I was messing around with apple loops but thats not the way I'm gonna work, it's not flexible enough... I'm afraid I have to use Ableton (which I never used before) because of the really well functioning "warping algorythm"... Are you exclusively working with Logic?
    • 4 years ago
    • By: Samu
    Reply
  • Samu
    Hello Rounik, it's Samuel again. My project changed a lot and I'm back in Logic. I figured how to use a external hardware device (with knobs etc.) but I have a new problem: I want to send a midi signal form another program (max/msp) to Logic to control the tempo of a midi file. I can see the the values in the input view but can't route them to the tempo fader :( Could you explain me how to do that? Thank in advance!!! Samuel
    • 4 years ago
    • By: Samu
    Reply
  • logicluvva
    Inspiring & as always, thoughtfully paced and therefore fully appreciated. Thanks
    • 8 years ago
    • By: logicluvva
    Reply
  • Rounik Admin
    Thanks logicluvva! Glad this tutorial has been helpful :)
    • 8 years ago
    • By: Rounik Admin
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: