All Articles Motion
议案:如何操作一个真正的3D盒子
Iain Anderson on Wed, February 22nd 13 comments
In this article Apple Motion Expert, Iain Anderson, shows you how to create a "real" 3D box and, because he's a generous sort, also provides the project files to download. Go 3D in Motion 5!

而其真正的运动让你在三维空间中,几乎所有的内,它是一个二维平面上的。有时你可以欺骗:例如,粒子特效可以迫使每个粒子总是面对镜头。这使得它没有真正的3D flamesbut好看。那么我们如何才能创建和操纵一个真正的三维框运动吗?简单:一次脸。在这篇文章中,使模具(我的内心ð

上手,以及创建一个新的运动项目。更直接的集成到Final Cut PRO X,你可以选择创建一台发电机,但现在用一个简单的运动项目。虐待被使用的1080p24预设。


Starting out


步骤1 - 1080p24预设的

HUB no outline


第2步 - HUD随着大纲中未检查的

举行

在Inspector中选择

  • Point 1: -200, 200
  • Point 2: 200, 200
  • Point 3: 200, -200
  • Point 4: -200, -200

Plane geometry


第3步 - 飞机几何

这将使下一步要容易得多:要创建五个重复这第一架飞机,然后重命名和重新定位,以形成一个立方体的两侧所有六个。使用图层面板重命名和重新定位的督察,具体如下:

选择原来的矩形,然后按下Command-D(重复)的五倍,共有六个面。

双击原来的平面(矩形),并调用它的前面。

  • back, Position Z: -200px
  • left, Position X: -200px, Rotation Y: 90°
  • right, Position X: 200px, Rotation Y: 90°
  • top, Position Y: 200px, Rotation X: 90°
  • bottom, Position Y: -200px, Rotation X: 90°

最后,双击该组包含这些飞机(简称

Cube group


步骤4 - 立方集团

完蛋了停留的一个立方体,你都无法看到它。我们需要添加一个摄像头,看到它在三维。

现在你会获得了三个相机的控制按钮,在右上角的画布区域(和非功能的摄像头图标左)系列。三个按钮,可以单击并拖动第二个控件直接,

Camera controls


第5步 - 相机控制

当你有一个关于外观,复位位置:

  • Select the Camera object in the Layers panel.
  • Choose Inspector > Properties.
  • Press the Reset arrow in the top right of the Transform section.
  • To avoid messing up the Camera position in future, you can use an alternative view.
  • Choose View > 3D View > Perspective, or press Control-P.

Bland 3D cube

rotation settings


步骤6 - 灰色立方

到目前为止,虽然我们的立方体是灰色和乏味。让我们照亮了。

按新增光

选择轻,并选择

创建另一个灯的X / Y / Z轴位置设置为300/300/500。选择

这是好事,但theres在后面都没有灯光。如果你想旋转的摄像头周围有:

复制第二个灯,然后设置其X / Y / Z轴位置-400/300/-1000。

Cube standing on a point


步骤7 -

The behavior spin


第8步 - 在图书馆的自旋行为

选择“图层”面板中的立方体组,然后按Apply按钮在顶部。

Spin parameters


步骤9 - 督察自转参数

都很好。现在整个方块旋转。怎么样,我们周围的框旋转摄像头以及?

有了它仍处于选中状态,把它复制( 编辑

Two sweep behaviors applied to the camera


第10步 - 两个扫描应用于相机的行为

现在相机的倾斜,而它旋转。最后,让我们发疯:

现在,你有一个摄像头,在他们身边绕三个纺纱箱。

每天面对这些立方体可以很容易地图像,你可以改变规模扩大在一个单一维度的立方体,你可以变成一个反射镜。如果您使用此作为起点,更大的东西,请在评论中链接到它。谢谢,祝你好运!


这里下载的运动项目文件。



Comments (13)

You must be logged in to comment. Login Now

  • KcR
    positioning with those coordinates does not give me a perfect cube - something I'm doing wrong?
    • 7 years ago
    • By: KcR
    Reply
  • Ridadoe
    Well, I just re-followed my own steps, to the end of part 3, and I got a perfect cube. If each side is 400px square, and each side is rotated correctly and positioned at 200px from the center point, it should be right. Not sure what you might have done wrong, but if you want to post a Motion file or a screenshot, I might be able to help.
    • 7 years ago
    • By: Ridadoe
    Reply
  • KcR
    Thanks, maybe my size is wrong, does he state its a 400px sq - I missed that then
    • 7 years ago
    • By: KcR
    Reply
  • KcR
    I thought each side is at 200 px, as per geometry point settings
    • 7 years ago
    • By: KcR
    Reply
  • Ridadoe
    You won't actually type in 400px anywhere. You give -200px to +200px in X and Y, which gives 400px wide and high.
    • 7 years ago
    • By: Ridadoe
    Reply
  • KcR
    as per his geometry settings, I double checked I matched those - still does not look right
    • 7 years ago
    • By: KcR
    Reply
  • Rounik Admin
    Hi KcR, Just to let you know... Iain Anderson, the author of this article and MPV Trainer, is "funwithstuff" (the person who has been assisting you in the comments above)... They are one and the same! ;-)
    • 7 years ago
    • By: Rounik Admin
    Reply
  • Ridadoe
    If you have a picture of what you're seeing and/or a copy of your Motion file, I'd be happy to take a look. I'm the tutorial author, so if there's a problem I'd like to track it down.
    • 7 years ago
    • By: Ridadoe
    Reply
  • KcR
    here's file, thanks http://dl.dropbox.com/u/3185488/cube.motn
    • 7 years ago
    • By: KcR
  • KcR
    sure, is there a way to attach a file
    • 7 years ago
    • By: KcR
    Reply
  • Rounik Admin
    The best way to attach a file is to use a service like box.net or yousendit.com then paste the address here.
    • 7 years ago
    • By: Rounik Admin
    Reply
  • Ridadoe
    Found the problem in your file. The front side hadn't been moved, but it should have had Z: 200. The left side was moved to X: -200 AND Z: 200, but it should only have had X moved. So, it looks like you had the left side selected when you changed Z to 200 rather than the front side. Also, the back side needed -200 not +200. For anyone checking this, Right/Left are +/- on X, Top/Bottom are +/- on Y, and Front/Back are +/- on Z. All other values should be 0.
    • 7 years ago
    • By: Ridadoe
    Reply
  • KcR
    Thanks for the follow up and diagnosis - will retry the steps
    • 7 years ago
    • By: KcR
    Reply
Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: