All Articles Reason
Using Regroove for Better Drums
G.W. Childs IV on Fri, August 26th 0 comments
What's better, a drum machine or a human drummer? This is a sure fire question to start an intense discussion! Avoid that and learn how to use Regroove for more realistic drum performances in Reason.

If you’re old enough, you may remember the debates during the 80s that used to go on about drummers vs. drum machines. If you don’t, let me recant a bit of the argument that used to take place.

Some drunk musician with a beer would start talking about a new drum machine with a buddy. Some guy (probably a drummer, or brother of a drummer) within earshot would hear the new features of the new drum machine and start talking about how a drum machine would never replace a drummer. The argument would unfold, similar to the Mac/PC argument, and eventually it would fade off in to nothing. 

In 2011, the drum machine still hasn’t replaced live drummers at all. In fact, the later are thriving in a music industry that now relies more on live music than it does record sales. Drummers are always a hot commodity... But not all of us have access to one. 

So, if you’re like me and do not have access to a drummer, what do you do? Stick to a more roboticdcdmkmlk sound within your music like Kraftwerk? Rely only on drum loops?

Well, Propellerheads have a very overlooked function within Reason that may just convince you to continue programming your own drums... With a very, very human feel.

Let’s see how it works!


Step 1 - Load up a Patch in Redrum

Actually, you can use Regroove to affect loops in Reason, but in the spirit of the 80’s, let’s program a little drum beat with Redrum, eh?

Load up the Disco Kit RDK from the Factory Soundbank, it’s one of the default patches, so it’s easy to find!

DIsco Kit RDK in Redrum


Step 2 - Create a Drum Loop

Next, create a 2 measure region in the Reason Sequencer. Then put the sequencer on Loop Mode.

Putting the Sequencer on Loop Mode


Draw in a 16 beat very similar, if not identical to mine. Copy away if you like, do it exactly, I won’t judge. Also, put your tempo on 99.


It sounds like this:


Step 3 - Setup the Track for Some Groove

On the Redrum Lane Control section, choose A1 from the Groove Drop-down menu,

A1 from Groove menu


When you do this, you’re telling Regroove what tracks it should affect. If you do not do this, Regroove will have no effect whatsoever, so don’t forget this part!


Step 4 - Opening Regroove

Push the Regroove button on the transport bar.

Regroove Button on Transport


This will open up the Regroove mixer. 

The Regroove Mixer


You’ll notice that the first channel is already assigned to A1, by default. This is great because all we have to do is bring up a groove and our already assigned track will immediately take effect. Press the Browse Patch button on the Channel assigned to A1.

Browse Patch button in Regroove


Locate the 70% Shuffle within the MPC-60 folder. 

70% Shuffle


Step 5 - Tweaking the Groove

Once you have a groove in place in the mixer and the track is assigned, you can start playing your loop and noticing the difference. Use the A1 fader to add more, or take away more groove.

The A1 fader


Listen to the difference!


It’s gone from a very robotic beat, to something that has a little... groove. Experiment and try it on your own, see what you think!

Learn more and get your groove on in Reason here.

Comments (0)

You must be logged in to comment.

Feedback
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for: