or browse by category
Take a 12 question quiz to test and certify your knowledge of the tutorial-video course
Audio Mistakes 108 - 10 Common Distortion/Saturation Mistakes.
Get a mark of 80% or higher to pass this quiz!
Three types of digital distortion are:
tube distortion, transistor distortion, and tape saturation
clipping, quantization distortion, and aliasing
plugins, inserts and sends
low, medium and high
Which of the following statement is true?
Distortion is always bad, unless it's analog, then it's always good.
Distortion can be both a problem and a useful processing effect.
Distortion is is always a bad thing.
When there's an extra input in an amp sim, that's not part of the virtual amp...
it should be used to add as much distortion as possible from the virtual amp
it should be used to avoid generating distortion from the virtual amp
it should be used to calibrate the incoming DI guitar signal for optimal level into the virtual amp
Some instruments other than guitar that might benefit from distortion/overdrive are:
All answers are correcy
Two different types of tubes in guitar amps, responsible for different distortion qualitites, are...
triodes (preamp tubes) and pentodes (poweramp tubes)
transistor and silicon
germanium and silicon
octodes (analog) and nanodes (digital)
Four sources of (potentially beneficial) distortion/saturation are...
tubes, transistors, transformers, and (analog) tape
clipping, gain-staging, limiting, and mixing
Guitar pedals, Plugins, Sends and Returns
plug-ins, inserts, Sends, and Returns
What are the three main sections of a guitar amp/sim?
preamp, tone stack, poweramp
amp, vibrato, tremolo
amp, delay, reverb
preamp, vibrato, reverb
Potentially beneficial distortion...
None of the other answers are correct
must be avoided-it's actually a myth, all distortion is bad
must be real analog distortion, generated by hardware
can be either (real or virtual) analog distortion, or digital distortion-it's how it's used
Pulling a signal out of a DAW and running it through a real amp is called...
The very subtle amount of distortion or saturation in many analog processors is called...
analog "warmth" and "presence"
When taking a guitar signal directly into a DAW, the correct input would be:
a Mic input
a MIDI input
an Instrument input
a Line input
Tape Saturation is...
what happens to analog tape if it's stored too long in a humid environment
what happens when too many tracks are recorded on an analog reel
the gentle compression and distortion from recording into the red on analog tape
Audio Mistakes 108
10 Common Distortion/Saturation Mistakes
You have answered
out of 12
to take this quiz.
If you do not have an account, please
Get Your Grade
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
You need 80% to pass this quiz
Back to the Course
View My Grades
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
Thank you for your input!
Your message has been successfully sent
Don't Know Where To Start?
Ask A Course Advisor
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become a macProVideo.com Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X