Re: EZDrummer multi out midi to au...
Hi Musicfox77
Welcome to the macProvideo forums.
Yes, this is very possible. Do you want to render each multi-out from EZDrummer in realtime or offline?
Basically, you can simply solo the track and choose File Bounce or in Logic 9, Bounce in Place or Bounce track in Place to do this.
If you want to route the outputs to Aux channels and then to Audio Channels to record in realtime... well, it's also possible.
In EZDrummer make sure to set different outputs for each channel.
In the Mixer, Click on the + button (bottom of the EZDrummer Channel Strip) to create Aux Channels.
In each Aux CS set the Output to it's own unused Bus. e.g. Bus 1, 2, 3 etc.
Create the number of audio tracks needed in the Arrange.
Se the Input in the I/O slot for each audio track to it's own Bus - following the Bus numbers you chose in the step above.
Record enable all the audio channels/tracks and hit record.
:)
Rounik
Reply