I have an Allen & Heath gsr24m. When setting it up in logic Pro 9 I used the us2400 software to control the surface of the board which it does for the first 24 tracks. As soon as I click on track 25 in the Logic mixer, Logic reassigns 24 new tracks from track 25 and up and drops tracks 1 to 24. This also moves all the faders from 1 to 24 as well messing up the mix. You can also see the little white bars at the bottom of each channel strip have disappeared from 1 to 24 and only appear under tracks 25 and up. When I look at the controller assignment tab in Logic it only shows assignments from 1 to 24, stop , go etc. Nowhere does it show any assignments to track 25 and up. My question is, what is Logic looking at, how do I get Logic to stop looking at tracks 25 and up. Is it a Logic problem or an Allen & Heath problem? To put everything back to normal I just click on any track below track 25 in Logic.