Hi Rounik this is the link: http://www.sendspace.com/file/dtoj9z Thanks [quote:7638]Hi Tulu, Could you upload it to sendspace? It's private there and can only be downloaded by those you give the address to. You can also take it down from the site whenever you want. Cheers Rounik[/quote]

Thanks Rounik I will do the instruction tomorrow and let you know because I have finished my empty CD. I will buy some tomorrow and do it. Tulu

Hi if I try 44.1, it does not give distortion but 48Khz gives distortion only. Tulu

Hi Rounik I guess I could not make you understand. As I mentioned before that 44.1 does not give problem now or before all these updates. 48 used to not give problem before the update but now it gives problem. I know that CD audio only supports playback sample rates of 44.1Khz or lower. At present if I records all instruments and others setting 48Khz in logic's global setting and if I go for bouncing setting the bouncing sampling to 44.1 and bit to 16, it distorts the output in the burned CD. But if I records at 44.1 global setting and bounce it 44.1, then its OK. Basically which never happened before the updates. Even previously I used to not look at the bouncing interface for bit or sampling rate and it used to burned perfectly. I dont know wheather I am clear to you, I mean was I able to exlain my problem precisely or not. Need your input. Thank you. Tulu

Hi Christian Yes I am positive that I bounced at 16 bit and 44.1Khz. But that is not a problem if the global sampling rate is also 44.1Khz. But if global is 48Khz and Bouncing is 48Khz or 44.1 Khz and 16 or 24 bit, it gets distorted. What logic version you use? Thanks Tulu

Yes I will upload sample. [quote:1687]I did some testing to reproduce your problem. I recorded a short song at 24 bits 48 kHz. I bounced it at different bits / sampling rate and tried playing them in Toast. Here's my results: 1-24 bits 48 kHz (distorted) 2-24 bits 44.1 kHz (ok) 3-16 bits 48 kHz (distorted) 4-16 bits 44.1 kHz (ok) Are you absolutely sure that you are [b]bouncing[/b] at 16 bits 44.1 kHz ? Maybe it could be worth it to upload a file to Sendspace like Yadj and Rounik suggested before.[/quote]

i use logic pro 7.0.1.

Hi before couple of months i updated the logic pro 7 to 7.1 through apple website and had many problem. can somebody help me - how to uninstall logic 7.1 from my mac g5 machine. basically i want to install my logic pro 7 again. please also give some steps how to make backup for my projects done in logic. i have an external lacie 250gig hard drive. i am new in mac. thanks tulu

thanks for your question. I have tried many ways as well as Rounic helped me with many instructions to solve it but finally i could not solve it. problem is: My old projects those were done in 48 khz now gives me distorted sound after bouncing. but 44.1 does not give problem.

Hi Rounik I tried according to your instruction to connect my RME with G5 and External hard drive but I cant see the hard drive. I connected like this - from Mac to RME and from RME to Hard drive with firewire 800 but it does not show the hard drive as well as the hard drive does not powered up. can you give me a solution? Thanks Tulu