Jamie, I can still hear the click track. I did what you suggested. I bounce the click & audio to 2 seperate tracks. I panned L & R. Playback sounds perfect, there is NO bleed. I bounce that 2 tracks to MP3. When I playback you can faintly hear bleed. I cannot figure this out. It has to be something in my bounce settings??

The click track that I am using is an audio track of a cowbell that the drummer likes to hear during performances. I guess the part I am having trouble wrapping my head around is the fact that my bounce doesn't sound EXACTLY like my mix. What's the point of spending time on a mix and then when you bounce it logic just changes it. You would think this would be the most seamless part of the operation. I am very discouraged with this format now. Thanks Rounik

How can I add 4 bars to the beginning of a song, without having to manually move each region 4 bars? Is there a way to shift the whole song 4 bars? Thanks,

Worked Great.... Thanks Rounik!!!!

Hello, I just installed Logic 9. I now have in my applications folder Logic 8 and 9 folders. I also have 2 main stage folders, and logic node folders. Is it safe for me to delete all the old folders to gain space? Thanks a bunch. Blkbrd57

Upgraded to Logic 9. Everything is working great EXCEPT! now I have no audio input. I use Apogee Duet. Has always worked great. When I plugged an instrument in, the levels are active on the Duet, but no response in Logic. In the "tracks" section there is only on/off switches for mute, solo, and Instrument. No Record button. With the instrument button active, I still get no sound. Apogee control panel is set to instrument. What am I missing? Thanks as always!

Thanks Rounik, For some reason the input device in Preferences had changed to "none" instead of "Duet". I changed this and everything is working fine. Thanks again for pointing me in the right direction. blkbrd

Hello, 2 quick questions. I picked up a 3rd party plug-in Way Out Wares timewARP 2600. It works in stand alone, but Logic does not recognize. I tried re-booting (which usually solves), but still no sign in Logic. Way out Ware suggested the following "You should try to re-scan your plug-ins in Logic. This should cause Logic to recognize TimewARP 2600. You do this by using the AU Manager." I do not know where to do this operation. Could you help? Also, I picked up Logic 9. Now when I select a software instrument, it defaults to EVP88. Can I set default to no setting? Could you tell me how? Thanks!!!!

Hamish, Thank you!! You are a superstar! Both of my issues have been resolved!! Thanks for the swift and effective response!!

Been using an Axiom 49 for about 3 years. All of a sudden the keyboard display reads "OFF" and I can't I can't change programs to get any sound. So I connected another controller in and IT DOES NOT WORK EITHER! What could be going on? What can I check? Sitting with no controller.....:( Thanks as always.