X Course Advisor FREE Course Advisor
(Close)
Watch Tutorials
macProVideo.com
Close
Mastering Paths in Adobe Creative Suite CS5

Check out our Illustrator: Working with Objects & Type course!

Paths are the fundamental part of drawing with Vectors in Illustrator, InDesign, Flash and even Photoshop. To really master using them to create shapes, or edit Clipping Paths, Masks etc in any of these Applications you must first master the Pen Tool. Not an easy task for anyone inexperienced with using them. This article will give you some effective tools and techniques to set you on your way. I've focused on Illustrator here but you will find most of the methods transfer across many Adobe CS applications


Step 1 - Create a Grid Guide

We're going to start with creating smooth, equal curved paths, to help with that some guides would be useful. Try this method to create a grid of guides equally spaced. 

Draw a large rectangle on the page, any color it wont matter. 

draw a rectangle


Now with the shape selected go to Object > Path > Split into Grid. In the window that pops up create 6 rows and 6 Columns.

a split grid


Make sure they have equal width and height, and set the gutter size to zero, then click OK.

The rectangle splits into a grid pattern. To turn it into guides choose View > Guides > Make Guides.

grid guides


Now you are ready to start drawing paths.


Step 2 - Place our first Anchor Point

Begin by selecting the Pen Tool and placing the cursor at the first crossroads of the grid guide you made.

The pen at the grid


Click with the tool and drag down, along the vertical guide. Stop dragging and release the tool when you reach the next horizontal guide. This creates an anchor point where you clicked and handles the same length and angle as the guide. 

Tip: Holding Shift as you drag the handles will keep the handles dead straight.


Step 3 - Place Your Second Anchor Point

To create a second anchor point, place your pen cursor over the next crossroads of the grid, (horizontally in line with the first). Click and drag straight up along the vertical guide  until the handle meets the next horizontal guide.

The first handles


By keeping the handles uniform in position, length and angle you will see that you've created a curved path that is equal at both ends. Try and add one more along your grid yourself, remember to drag the first handle you create down and the second one up. This will create an S-curve shape 

2nd handle and path


S-curve shape


Step 4 - Modify the Handles

Now, you are ready to add a 4th curve, only this time the curve will go in the same direction as the last one you drew. So more of a W or M shape rather than an S.

The W curve


Before adding any more anchor points, press and hold the Option key and watch as it turns your Pen tool into the Convert Anchor Point tool. Release Option and it reverts back to the Pen tool again. 

Now use that Convert Anchor Point tool to grab the handle you drew in the last step (the one pointing down) and move its position up, so that it sits exactly on top of its opposite partner.



The handle has two roles, firstly it will dictate the direction of the curve preceding it, once thats decided the trailing handles job is to dictate the direction of the curve proceeding it. In this case we have changed the next handle from being one that begins by curving down (the handle was pointing down) into a curve that begins by curving up (the handle now points up).


Step 5 - Place Fourth Anchor Point

To test this, now try adding a further anchor point to the grid and drag the handle up again. 

See? Using this Option-Drag technique on your handles now means that you can control curved Paths to do anything you need of them. 

Handle move before

Handle move after


Step 6 - Round The Corner

Lets try curving round a corner. Take the last handle you drew and Option-Drag it to an angle of 3 O'Clock (make it a bit longer to). 

Then Click on a grid point a few rows down and drag your handles out at an angle of 3 O'Clock. Try and make them the same length as you drag. 


The W curve


Step 7 - Flattening Out Curves

Now you want to return to adding straight line to this Path. Take the Pen tool over to another crossroads on your grid and click once (no dragging). Normally clicking with the pen tool creates straight lines. 

Because one side of your path has handles then the line will curve from there. Use the Option and Drag technique to grab the trailing handle (the one at 7 o'Clock) and swing it round until it sits in line with the straight path. This will remove the curve from that side of the path. 

Round the corner


Step 8 - Re-Convening Paths

It's important that you keep the pen tool active at all times when you are drawing a path, which is why you're using the Option key to switch to the Convert Anchor Point tool instead of the tool palette. This is because changing tools at any stage would in effect close the path you are drawing and any further anchor points would begin a new path instead. This can be very frustrating. 

Re-opening a path mid way through its creation couldn't be simpler however. 

First change your tool to the Selection Tool, which closes the path (even though the stroke might not be visible).

Pick up the Pen Tool again and hover its cursor over the last anchor point. You will see a / symbol appear next to the Pen. 

Not straight lines!


Click on the Anchor Point, then continue to add more anchor points where you want, the path will resume building again.

Straight line with moved handle

 

Step 9 - Joining Paths

Another really simple method to join 2 paths instead is to simply select the 2 end anchor points (one from each path) that you need to join with the Direct Selection Tool.


pen tool


Press and hold Shift and click on one Anchor then the other (another method is to drag a selection box, or Marquis over the 2 points). Both points should highlight with a solid color, the same color as the path itself. 

Press Command-J to join them together. 

Pic 13


Step 10 - Re-Editing Handles

If you need to go back and modify any handles further, to better refine your path, pick up the Direct Selection Tool again. Use it to click on the Anchor Point whose handles require modification. The handles re-appear. 

Use the Direct Selection Tool from now on to modify handles, just as with the Convert Anchor Point tool earlier, once the path is completed. 

Tip: The convert Anchor Point tool when used on its own will turn curves back into corners, so we avoid it now.


Step 11 - Adding/Removing Anchors

Finally if you have added too many anchor points, use the Delete Anchor Point tool (you will find it behind the Pen Tool in the Tools Palette). 

Pic 14


Click on the Anchor to be removed and it's gone.

The Add Anchor point tool adds more anchor points to an existing Path. Clicking on a path at the point where you need the additional anchor point with the tool will add one there for you. 

Handles re-appear


Now Im not trying to say that drawing paths with the Pen Tool will an easy thing to do now, but keep practicing these techniques until you can use them without thinking and you'll find that eventually they are! 


Check out our Illustrator: Working with Objects & Type course!

David Smith

David Smith | Articles by this author

David Smith is Scotland's most qualified Apple and Adobe certified trainer. Having completed his education at Edinburgh College of Art's BAFTA winning Film School, David moved straight into TV production, first as a Vision Mixer then quickly becoming, at the age of just 24, a director of live TV studio productions. In 2001 he moved into Higher Education where he became a lecturer in TV Production, specializing in post-production and live studio production. During this time, and working with the support of the BBC, Channel 4 and independent production companies, David was instrumental in the design, development and implementation of industry-approved vocational courses across Scotland's Colleges. In 2006, after working closely with Apple Computers to create a unique multimedia studio for education at the Music and Media Centre in Perth, David became Scotland's first Apple-Certified Trainer for Pro Apps. This led on to David forming the first Apple Authorized Training Centre for Education, north of Manchester. In 2008 David made the move to full time training and joined the ranks at Academy Class, Ltd. where he continues to train industry professionals as a certified trainer across the Adobe Creative Suite and Apple Pro Apps range.

Comments

You must be logged in to post a comment.
Create an Account  Login Now

What is macProVideo.com?

macProVideo.com is an online education community featuring Tutorial-Videos & Training for popular Audio & Video Applications including Adobe CS, Logic Studio, Final Cut Studio, and more.
© 2018 macProVideo.com
a division of NonLinear Educating Inc.
Link